Set SD pin driving to 4mA
Signed-off-by: Dong Huang <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
---
arch/arm/dts/mt7988-sd-rfb.dts | 2 ++
arch/arm/dts/mt7988.dtsi | 1 +
2 files changed, 3 insertions(+)
diff --git a/arch/arm/dts/mt7988-sd-rfb.dts b/arch/arm/dts/mt7988-sd-rfb.dts
index a3df37d252..9aa198b84a 100644
--- a/arch/arm/dts/mt7988-sd-rfb.dts
+++ b/arch/arm/dts/mt7988-sd-rfb.dts
@@ -87,10 +87,12 @@
pins = "SPI2_CSB", "SPI2_MISO", "SPI2_MOSI",
"SPI2_CLK", "SPI2_HOLD";
input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
};
conf-clk {
pins = "SPI2_WP";
+ drive-strength = <MTK_DRIVE_4mA>;
};
};
};
diff --git a/arch/arm/dts/mt7988.dtsi b/arch/arm/dts/mt7988.dtsi
index ac476d5cdd..5c0c5bcfd6 100644
--- a/arch/arm/dts/mt7988.dtsi
+++ b/arch/arm/dts/mt7988.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/mt7988-clk.h>
#include <dt-bindings/reset/mt7988-reset.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
#include <dt-bindings/phy/phy.h>
/ {
--
2.34.1
