Allow setting the clock rate for the SD card core clock. This is required for SD card support on SDM845 devices.
Signed-off-by: Caleb Connolly <[email protected]> --- drivers/clk/qcom/clock-qcom.h | 1 + drivers/clk/qcom/clock-sdm845.c | 17 +++++++++++++++++ 2 files changed, 18 insertions(+) diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h index cc170d8e3f9e..f6445c8f566f 100644 --- a/drivers/clk/qcom/clock-qcom.h +++ b/drivers/clk/qcom/clock-qcom.h @@ -12,8 +12,9 @@ #define CFG_CLK_SRC_GPLL0_AUX2 (2 << 8) #define CFG_CLK_SRC_GPLL9 (2 << 8) #define CFG_CLK_SRC_GPLL6 (4 << 8) #define CFG_CLK_SRC_GPLL7 (3 << 8) +#define CFG_CLK_SRC_GPLL4 (5 << 8) #define CFG_CLK_SRC_GPLL0_EVEN (6 << 8) #define CFG_CLK_SRC_MASK (7 << 8) #define RCG_CFG_REG 0x4 diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c index e9c61eb480de..782df7da8444 100644 --- a/drivers/clk/qcom/clock-sdm845.c +++ b/drivers/clk/qcom/clock-sdm845.c @@ -23,8 +23,9 @@ #define USB30_PRIM_MASTER_CLK_CMD_RCGR 0xf018 #define USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR 0xf030 #define USB3_PRIM_PHY_AUX_CMD_RCGR 0xf05c +#define SDCC2_APPS_CLK_CMD_RCGR 0x1400c static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625), F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625), @@ -43,8 +44,19 @@ static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { F(128000000, CFG_CLK_SRC_GPLL0, 1, 16, 75), { } }; +static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = { + F(400000, CFG_CLK_SRC_CXO, 12, 1, 4), + F(9600000, CFG_CLK_SRC_CXO, 2, 0, 0), + F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0), + F(25000000, CFG_CLK_SRC_GPLL0_EVEN, 12, 0, 0), + F(50000000, CFG_CLK_SRC_GPLL0_EVEN, 6, 0, 0), + F(100000000, CFG_CLK_SRC_GPLL0, 6, 0, 0), + F(201500000, CFG_CLK_SRC_GPLL4, 4, 0, 0), + { } +}; + static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate) { struct msm_clk_priv *priv = dev_get_priv(clk->dev); const struct freq_tbl *freq; @@ -54,8 +66,13 @@ static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate) freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate); clk_rcg_set_rate_mnd(priv->base, SE9_UART_APPS_CMD_RCGR, freq->pre_div, freq->m, freq->n, freq->src, 16); return freq->freq; + case GCC_SDCC2_APPS_CLK: + freq = qcom_find_freq(ftbl_gcc_sdcc2_apps_clk_src, rate); + clk_rcg_set_rate_mnd(priv->base, SDCC2_APPS_CLK_CMD_RCGR, + freq->pre_div, freq->m, freq->n, freq->src, 8); + return freq->freq; default: return 0; } } -- 2.44.0
