Add another mux option for ETH1 pins, this is used on
DH electronics STM32MP13xx DHCOR DHSBC board.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
Cc: u-b...@dh-electronics.com
Cc: uboot-st...@st-md-mailman.stormreply.com
---
arch/arm/dts/stm32mp13-pinctrl.dtsi | 46 +++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi
b/arch/arm/dts/stm32mp13-pinctrl.dtsi
index 396fb6eee84..c709d64edcc 100644
--- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
@@ -26,6 +26,52 @@
};
};
+ eth1_rgmii_pins_a: eth1-rgmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 13, AF11)>, /*
ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /*
ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /*
ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 5, AF10)>, /*
ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>, /*
ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('C', 1, AF11)>, /*
ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+ <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /*
ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /*
ETH_RGMII_RXD1 */
+ <STM32_PINMUX('B', 0, AF11)>, /*
ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, AF11)>, /*
ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 7, AF11)>, /*
ETH_RGMII_RX_CTL */
+ <STM32_PINMUX('D', 7, AF10)>; /*
ETH_RGMII_RX_CLK */
+ bias-disable;
+ };
+
+ };
+
+ eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /*
ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>, /*
ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /*
ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /*
ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /*
ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('C', 1, ANALOG)>, /*
ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /*
ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /*
ETH_RGMII_RXD1 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /*
ETH_RGMII_RXD1 */
+ <STM32_PINMUX('B', 1, ANALOG)>, /*
ETH_RGMII_RXD1 */
+ <STM32_PINMUX('A', 7, ANALOG)>, /*
ETH_RGMII_RX_CTL */
+ <STM32_PINMUX('D', 7, ANALOG)>; /*
ETH_RGMII_RX_CLK */
+ };
+ };
+
i2c1_pins_a: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
--
2.43.0
