[PATCH 08/19] ARM: dts: stm32: Add alternate pinmux for MP13 PWM5 pins

[Marek Vasut]

Add another mux option for PWM5 pins, this is used on
DH electronics STM32MP13xx DHCOR DHSBC board.

Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
Cc: u-b...@dh-electronics.com
Cc: uboot-st...@st-md-mailman.stormreply.com
---
 arch/arm/dts/stm32mp13-pinctrl.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi 
b/arch/arm/dts/stm32mp13-pinctrl.dtsi
index b58bf6c0024..d19408f19f9 100644
--- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
@@ -245,6 +245,21 @@
                };
        };
 
+       pwm5_pins_a: pwm5-0 {
+               pins {
+                       pinmux = <STM32_PINMUX('H', 12, AF2)>; /* TIM5_CH3 */
+                       bias-pull-down;
+                       drive-push-pull;
+                       slew-rate = <0>;
+               };
+       };
+
+       pwm5_sleep_pins_a: pwm5-sleep-0 {
+               pins {
+                       pinmux = <STM32_PINMUX('H', 12, ANALOG)>; /* TIM5_CH3 */
+               };
+       };
+
        pwm8_pins_a: pwm8-0 {
                pins {
                        pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */
-- 
2.43.0