Hi Wadim, On Thu, 2024-11-07 at 09:52 +0100, Wadim Egorov wrote: > Hi Yannic, > > Am 07.11.24 um 09:23 schrieb Yannic Moog: > > The phyBOARD-Pollux expects 0x56000000 address to load optee. > > You are already defining a default for IMX8M_OPTEE_LOAD_ADDR in the > mach-imx Kconf. You can drop the patches touching the defconfigs.
I would like to keep these patches as the default value is "only" there to get a functioning build. To me it would seem there has been no thought put in to what the actual correct value would be if left as default. Does that make sense? Yannic > > Regards, > Wadim > > > > > Signed-off-by: Yannic Moog <[email protected]> > > --- > > configs/phycore-imx8mp_defconfig | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/configs/phycore-imx8mp_defconfig > > b/configs/phycore-imx8mp_defconfig > > index 1240c7fcbd0..910109afd80 100644 > > --- a/configs/phycore-imx8mp_defconfig > > +++ b/configs/phycore-imx8mp_defconfig > > @@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000000 > > CONFIG_SPL_GPIO=y > > CONFIG_SPL_LIBCOMMON_SUPPORT=y > > CONFIG_SPL_LIBGENERIC_SUPPORT=y > > +CONFIG_IMX8M_OPTEE_LOAD_ADDR=0x56000000 > > CONFIG_PHYTEC_SOM_DETECTION=y > > CONFIG_SF_DEFAULT_SPEED=80000000 > > CONFIG_ENV_SIZE=0x10000 > > >
