Am 08.11.24 um 13:59 schrieb Yannic Moog:
On Thu, 2024-11-07 at 10:07 +0100, Wadim Egorov wrote:
Am 07.11.24 um 09:23 schrieb Yannic Moog:
Add documentation for the phyBOARD-Pollux i.MX 8M Plus on OP-TEE
integration.
Also add missing '-' to TF-A build instruction while at it.
Would it make sense to move these instructions into a more general
section, so they could be reused by other imx based boards as well?
I have not put much thought into it. At first glance though, when reading the
documentation for a
board I don't want to be redirected to other pages. So using an include comes
to mind. Is that what
you had in mind as well?
Yes, I was thinking about using includes to reduce doc duplication.
Seems you missed to update imx8mm-phygate-tauri-l.rst
Should be in the (next) patch for the imx8mm, as Tauri is based on
phycore-imx8mm. Let me know if
you meant something else.
Ah! I missed that you change both files in the next patch.
Yannic
Signed-off-by: Yannic Moog <[email protected]>
---
doc/board/phytec/phycore-imx8mp.rst | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/doc/board/phytec/phycore-imx8mp.rst
b/doc/board/phytec/phycore-imx8mp.rst
index fda751aeffb..4bcfa9f39ca 100644
--- a/doc/board/phytec/phycore-imx8mp.rst
+++ b/doc/board/phytec/phycore-imx8mp.rst
@@ -9,6 +9,7 @@ Quick Start
-----------
- Build the ARM Trusted firmware binary
+- Build the OP-TEE binary (optional)
- Get ddr firmware
- Build U-Boot
- Boot
@@ -20,10 +21,32 @@ Build the ARM Trusted firmware binary
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
$ cd trusted-firmware-a
- $ export CROSS_COMPILE=aarch64-linux-gnu
+ $ export CROSS_COMPILE=aarch64-linux-gnu-
$ export IMX_BOOT_UART_BASE=0x30860000
+ $ # with optee
+ $ make PLAT=imx8mp SPD=opteed bl31
+ $ # without optee
$ make PLAT=imx8mp bl31
+Build the OP-TEE binary (optional)
+----------------------------------
+
+.. code-block:: bash
+
+ $ git clone https://github.com/OP-TEE/optee_os.git
+ $ cd optee_os
+ $ make CFG_ARM64_core=y \
+ CFG_TEE_BENCHMARK=n \
+ CROSS_COMPILE=aarch64-linux-gnu- \
+ CROSS_COMPILE_core=aarch64-linux-gnu- \
+ CROSS_COMPILE_ta_arm32=arm-linux-gnueabihf- \
+ CROSS_COMPILE_ta_arm64=aarch64-linux-gnu- \
+ O=out/arm \
+ PLATFORM=imx-mx8mpevk \
+ CFG_TZDRAM_START=0x56000000 \
+ CFG_DDR_SIZE=0x80000000 \
+ CFG_UART_BASE=UART1_BASE
+
Get the ddr firmware
--------------------
@@ -42,6 +65,7 @@ Copy binaries
.. code-block:: bash
$ cp <TF-A dir>/build/imx8mp/release/bl31.bin .
+ $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin
$ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin .
Build U-Boot
