Now that USB phy and dwc3 glue layer was added for Exynos850, USB gadget
is functional on E850-96 board. Enable next features to make it useful:
- Exynos850 USB PHY driver (needed for all USB functions)
- dwc3 generic driver
- USB gadget
- CONFIG_DM_USB_GADGET: needed for DWC3 glue layer to instantiate the
peripheral driver, i.e. dwc3_generic_peripheral_probe()
- USB VID and PID
- DFU
- Fastboot (including flashing to eMMC boot partitions)
As all Exynos firmware binaries (including U-Boot) are contained in eMMC
boot partition A (mmc0boot0), because that's where Boot ROM code jumps,
it might be useful to be able to flash that area with fastboot. Other
more fine grained choices for updating the firmware would be DFU and EFI
Capsule Update mechanism.
Signed-off-by: Sam Protsenko <semen.protse...@linaro.org>
---
configs/e850-96_defconfig | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/configs/e850-96_defconfig b/configs/e850-96_defconfig
index 375805b3e5ca..96e91959f16c 100644
--- a/configs/e850-96_defconfig
+++ b/configs/e850-96_defconfig
@@ -15,7 +15,6 @@ CONFIG_SYS_LOAD_ADDR=0x80000000
CONFIG_ENV_OFFSET_REDUND=0x10000
# CONFIG_PSCI_RESET is not set
CONFIG_EFI_SET_TIME=y
-CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_BOOTSTD_FULL=y
CONFIG_DEFAULT_FDT_FILE="exynos850-e850-96.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
@@ -24,6 +23,7 @@ CONFIG_CMD_BOOTEFI_SELFTEST=y
CONFIG_CMD_ABOOTIMG=y
CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_EFIDEBUG=y
@@ -39,8 +39,18 @@ CONFIG_ENV_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_MMC_EMMC_HW_PARTITION=2
CONFIG_NO_NET=y
CONFIG_CLK_EXYNOS850=y
+CONFIG_DFU_MMC=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x8a000000
+CONFIG_FASTBOOT_BUF_SIZE=0x30000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_DW=y
+CONFIG_PHY=y
+CONFIG_PHY_EXYNOS_USBDRD=y
CONFIG_DM_RTC=y
CONFIG_RTC_EMULATION=y
CONFIG_SOC_SAMSUNG=y
@@ -48,3 +58,11 @@ CONFIG_EXYNOS_PMU=y
CONFIG_EXYNOS_USI=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_SYSCON=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Samsung"
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0002
--
2.39.5
