Make it possible to update E850-96 firmware binaries using EFI Capsule
Update mechanism. For example, to update the U-Boot binary, the capsule
file can be generated like this:
$ ./tools/mkeficapsule --index 4 \
--guid 629578c3-ffb3-4a89-ac0c-611840727779 \
u-boot.bin capsule4.bin
The resulting 'capsule4.bin' should be copied to ESP partition (in
/boot/efi/EFI/UpdateCapsule/ directory). Then after reboot U-Boot will
update the 'bootloader' area in eMMC Boot Partition A (boot0) and remove
the capsule file, by EFI boot manager executed as a part of Standard
Boot:
Applying capsule capsule4.bin succeeded.
Reboot after firmware update.
The kernel will also expose the ESRT table information via SysFS in
/sys/firmware/efi/esrt/entries.
Signed-off-by: Sam Protsenko <semen.protse...@linaro.org>
---
board/samsung/e850-96/e850-96.c | 40 +++++++++++++++++++++++++++++++++
configs/e850-96_defconfig | 3 +++
include/configs/e850-96.h | 21 +++++++++++++++++
3 files changed, 64 insertions(+)
diff --git a/board/samsung/e850-96/e850-96.c b/board/samsung/e850-96/e850-96.c
index addfe0460973..4e034b9bd3be 100644
--- a/board/samsung/e850-96/e850-96.c
+++ b/board/samsung/e850-96/e850-96.c
@@ -4,6 +4,7 @@
* Author: Sam Protsenko <semen.protse...@linaro.org>
*/
+#include <efi_loader.h>
#include <env.h>
#include <init.h>
#include <mapmem.h>
@@ -15,6 +16,45 @@
#define OTP_CHIPID0 0x4
#define OTP_CHIPID1 0x8
+struct efi_fw_image fw_images[] = {
+ {
+ .image_type_id = E850_96_FWBL1_IMAGE_GUID,
+ .fw_name = u"E850-96-FWBL1",
+ .image_index = 1,
+ },
+ {
+ .image_type_id = E850_96_EPBL_IMAGE_GUID,
+ .fw_name = u"E850-96-EPBL",
+ .image_index = 2,
+ },
+ {
+ .image_type_id = E850_96_BL2_IMAGE_GUID,
+ .fw_name = u"E850-96-BL2",
+ .image_index = 3,
+ },
+ {
+ .image_type_id = E850_96_BOOTLOADER_IMAGE_GUID,
+ .fw_name = u"E850-96-BOOTLOADER",
+ .image_index = 4,
+ },
+ {
+ .image_type_id = E850_96_EL3_MON_IMAGE_GUID,
+ .fw_name = u"E850-96-EL3-MON",
+ .image_index = 5,
+ },
+};
+
+struct efi_capsule_update_info update_info = {
+ .dfu_string = "mmc 0="
+ "fwbl1.img raw 0x0 0x18 mmcpart 1;"
+ "epbl.img raw 0x18 0x98 mmcpart 1;"
+ "bl2.img raw 0xb0 0x200 mmcpart 1;"
+ "bootloader.img raw 0x438 0x1000 mmcpart 1;"
+ "el3_mon.img raw 0x1438 0x200 mmcpart 1",
+ .num_images = ARRAY_SIZE(fw_images),
+ .images = fw_images,
+};
+
int dram_init(void)
{
return fdtdec_setup_mem_size_base();
diff --git a/configs/e850-96_defconfig b/configs/e850-96_defconfig
index 96e91959f16c..e334efd4d5fb 100644
--- a/configs/e850-96_defconfig
+++ b/configs/e850-96_defconfig
@@ -15,6 +15,9 @@ CONFIG_SYS_LOAD_ADDR=0x80000000
CONFIG_ENV_OFFSET_REDUND=0x10000
# CONFIG_PSCI_RESET is not set
CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
CONFIG_BOOTSTD_FULL=y
CONFIG_DEFAULT_FDT_FILE="exynos850-e850-96.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
diff --git a/include/configs/e850-96.h b/include/configs/e850-96.h
index 4607b3089b21..63e85332bd86 100644
--- a/include/configs/e850-96.h
+++ b/include/configs/e850-96.h
@@ -9,4 +9,25 @@
#ifndef __E850_96_H
#define __E850_96_H
+/* GUIDs for capsule updatable firmware images */
+#define E850_96_FWBL1_IMAGE_GUID \
+ EFI_GUID(0x181cd3f2, 0xe375, 0x44d2, 0x80, 0x78, \
+ 0x32, 0x21, 0xe1, 0xdf, 0xb9, 0x5e)
+
+#define E850_96_EPBL_IMAGE_GUID \
+ EFI_GUID(0x66c1a54d, 0xd149, 0x415d, 0xaa, 0xda, \
+ 0xb8, 0xae, 0xe4, 0x99, 0xb3, 0x70)
+
+#define E850_96_BL2_IMAGE_GUID \
+ EFI_GUID(0x89471c2a, 0x6c8d, 0x4158, 0xac, 0xad, \
+ 0x23, 0xd3, 0xb2, 0x87, 0x3d, 0x35)
+
+#define E850_96_BOOTLOADER_IMAGE_GUID \
+ EFI_GUID(0x629578c3, 0xffb3, 0x4a89, 0xac, 0x0c, \
+ 0x61, 0x18, 0x40, 0x72, 0x77, 0x79)
+
+#define E850_96_EL3_MON_IMAGE_GUID \
+ EFI_GUID(0xdf5718a2, 0x930a, 0x4916, 0xbb, 0x19, \
+ 0x32, 0x13, 0x21, 0x4d, 0x84, 0x86)
+
#endif /* __E850_96_H */
--
2.39.5
