[PATCH 04/17] rockchip: odroid-go2: Use appropriate bootph props

[Jonas Karlman]

GPIO devices are needed in U-Boot proper phase, sdmmc and sfc devices
are needed in SPL and pre-reloc phase.

Update bootph- props to match what boot phase devices are needed at.

Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
 arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi 
b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
index df21747fad78..a27994e450c0 100644
--- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
+++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
@@ -27,22 +27,18 @@
 };
 
 &gpio0 {
-       bootph-all;
        gpio-ranges = <&pinctrl 0 0 32>;
 };
 
 &gpio1 {
-       bootph-all;
        gpio-ranges = <&pinctrl 0 32 32>;
 };
 
 &gpio2 {
-       bootph-all;
        gpio-ranges = <&pinctrl 0 64 32>;
 };
 
 &gpio3 {
-       bootph-all;
        gpio-ranges = <&pinctrl 0 96 32>;
 };
 
@@ -78,28 +74,30 @@
 };
 
 &sdmmc {
-       bootph-all;
+       bootph-pre-ram;
+       bootph-some-ram;
 
        /* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
        u-boot,spl-fifo-mode;
 };
 
 &sfc {
-       bootph-all;
+       bootph-some-ram;
 };
 
 &{/spi@ff3a0000/flash@0} {
-       bootph-all;
+       bootph-pre-ram;
+       bootph-some-ram;
 };
 
 &uart1 {
-       clock-frequency = <24000000>;
        bootph-all;
+       clock-frequency = <24000000>;
 };
 
 &uart2 {
-       clock-frequency = <24000000>;
        bootph-all;
+       clock-frequency = <24000000>;
 };
 
 &xin24m {
-- 
2.49.0