On Sun, Oct 12, 2025 at 11:55:58AM -0700, Tanmay Kathpalia wrote: > Add SPL_DWAPB_GPIO configuration option to enable the Designware APB > GPIO driver in SPL builds. > > Changes: > - Add SPL_DWAPB_GPIO Kconfig option with SPL_DM_GPIO dependency > - Update Makefile to use CONFIG_$(XPL_)DWAPB_GPIO pattern for > conditional compilation in both SPL and main U-Boot builds > > Signed-off-by: Tanmay Kathpalia <[email protected]> > --- > drivers/gpio/Kconfig | 8 ++++++++ > drivers/gpio/Makefile | 2 +- > 2 files changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index db077e472a8..00bf974c0f3 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -138,6 +138,14 @@ config DWAPB_GPIO > help > Support for the Designware APB GPIO driver. > > +config SPL_DWAPB_GPIO > + bool "DWAPB GPIO driver in SPL" > + depends on SPL_DM_GPIO > + help > + Support for the Designware APB GPIO driver in SPL. > + > + If unsure, say N. > + > config AT91_GPIO > bool "AT91 PIO GPIO driver" > depends on ARCH_AT91 > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile > index 73c94329e36..da2c02b32da 100644 > --- a/drivers/gpio/Makefile > +++ b/drivers/gpio/Makefile > @@ -4,12 +4,12 @@ > # Wolfgang Denk, DENX Software Engineering, [email protected]. > > ifndef CONFIG_XPL_BUILD > -obj-$(CONFIG_DWAPB_GPIO) += dwapb_gpio.o > obj-$(CONFIG_AXP_GPIO) += axp_gpio.o > obj-$(CONFIG_DM_74X164) += 74x164_gpio.o > endif > obj-$(CONFIG_$(PHASE_)DM_GPIO) += gpio-uclass.o > > +obj-$(CONFIG_$(XPL_)DWAPB_GPIO) += dwapb_gpio.o
This should be PHASE_ not XPL_. -- Tom
signature.asc
Description: PGP signature
