Add SPL_DWAPB_GPIO configuration option to enable the Designware APB GPIO driver in SPL builds.
Changes: - Add SPL_DWAPB_GPIO Kconfig option with SPL_DM_GPIO dependency - Update Makefile to use CONFIG_$(XPL_)DWAPB_GPIO pattern for conditional compilation in both SPL and main U-Boot builds Signed-off-by: Tanmay Kathpalia <[email protected]> --- drivers/gpio/Kconfig | 8 ++++++++ drivers/gpio/Makefile | 2 +- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index db077e472a8..00bf974c0f3 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -138,6 +138,14 @@ config DWAPB_GPIO help Support for the Designware APB GPIO driver. +config SPL_DWAPB_GPIO + bool "DWAPB GPIO driver in SPL" + depends on SPL_DM_GPIO + help + Support for the Designware APB GPIO driver in SPL. + + If unsure, say N. + config AT91_GPIO bool "AT91 PIO GPIO driver" depends on ARCH_AT91 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 73c94329e36..da2c02b32da 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -4,12 +4,12 @@ # Wolfgang Denk, DENX Software Engineering, [email protected]. ifndef CONFIG_XPL_BUILD -obj-$(CONFIG_DWAPB_GPIO) += dwapb_gpio.o obj-$(CONFIG_AXP_GPIO) += axp_gpio.o obj-$(CONFIG_DM_74X164) += 74x164_gpio.o endif obj-$(CONFIG_$(PHASE_)DM_GPIO) += gpio-uclass.o +obj-$(CONFIG_$(XPL_)DWAPB_GPIO) += dwapb_gpio.o obj-$(CONFIG_$(PHASE_)DM_PCA953X) += pca953x_gpio.o obj-$(CONFIG_ADI_GPIO) += gpio-adi-adsp.o -- 2.35.3
