On 12/8/25 15:47, Ralph Siemsen wrote: > To reduce SPL size, make it possible to exclude designware driver, > while keeping it enabled in the main u-boot. > > Signed-off-by: Ralph Siemsen <[email protected]> > --- > drivers/spi/Kconfig | 8 ++++++++ > drivers/spi/Makefile | 2 +- > 2 files changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > index 2afb15fff1e..94054ba39b0 100644 > --- a/drivers/spi/Kconfig > +++ b/drivers/spi/Kconfig > @@ -223,6 +223,14 @@ config DESIGNWARE_SPI > access the SPI NOR flash on platforms embedding this Designware > IP core. > > +config SPL_DESIGNWARE_SPI > + bool "Designware SPI driver in SPL" > + depends on SPL > + default y > + help > + Enable the Designware SPI driver during SPL. > + See the help of DESIGNWARE_SPI for details. > +
In addition to Tom's comment this should probably be moved out of the SPI/DM_SPI if/endif and made to depend on SPL_DM_SPI. > config EXYNOS_SPI > bool "Samsung Exynos SPI driver" > depends on ARCH_EXYNOS > diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile > index d5d1e543588..0dc2d23e172 100644 > --- a/drivers/spi/Makefile > +++ b/drivers/spi/Makefile > @@ -35,7 +35,7 @@ obj-$(CONFIG_CF_SPI) += cf_spi.o > obj-$(CONFIG_CORTINA_SFLASH) += ca_sflash.o > obj-$(CONFIG_CV1800B_SPIF) += cv1800b_spif.o > obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o > -obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o > +obj-$(CONFIG_$(PHASE_)DESIGNWARE_SPI) += designware_spi.o > obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o > obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o > obj-$(CONFIG_FSL_ESPI) += fsl_espi.o > > --- > base-commit: 0e0a198a68be71148f5ec27ef86796174f91436f > change-id: 20251208-spi-designware-spl-d85d6a26e5e9 > > Best regards, > -- > Ralph Siemsen <[email protected]> >
