Hi Ozan and Tom, On Mon, Jan 26, 2026 at 11:15 AM <[email protected]> wrote: > > From: Ozan Durgut <[email protected]> > > This series introduces updates for Analog Devices SC5xx boards. > > It cleans up device trees by renaming GPIO expanders and removing > incorrect SPI flash definitions from the common include file. > > For the SC598, this series updates the EZLITE board to the latest > Revision E hardware. It also adds missing GPIO hogs and enables > additional commands for the EZKIT configuration. > > Ozan Durgut (4): > configs: sc598-ezkit: enable additional commands > arm: dts: sc598: add missing GPIO hogs for Rev D > arm: dts: adi: rename GPIO expanders > arm: dts: sc598: update EZLITE to latest revision > > Philip Molloy (1): > arm: dts: sc5xx: drop SPI flash from common dtsi > > arch/arm/dts/sc573-ezkit.dts | 4 ++-- > arch/arm/dts/sc584-ezkit.dts | 4 ++-- > arch/arm/dts/sc589-ezkit.dts | 4 ++-- > arch/arm/dts/sc594-som-ezkit.dts | 2 +- > arch/arm/dts/sc594-som-ezlite.dts | 2 +- > arch/arm/dts/sc598-som-ezkit.dts | 2 +- > arch/arm/dts/sc598-som-ezlite.dts | 4 ++-- > arch/arm/dts/sc598-som-revD.dtsi | 32 +++++++++++++++++++++++++++ > arch/arm/dts/sc5xx.dtsi | 11 --------- > configs/sc598-som-ezkit-spl_defconfig | 4 ++++ > 10 files changed, 47 insertions(+), 22 deletions(-) > > -- > 2.43.0 >
I tried this series on top of 2026.04-rc1 and ran my usual tests against an sc573 ezkit and an sc598 rev D som + ezkit carrier board. Note that to test the rev D board I have to omit dtsi switch to rev E, but other than that everything looks good to me functionality-wise. Some commit messages could be expanded (such as adding info about why wget/fat/gpt/mtd are being enabled), but I don't see a need to resubmit just for that. For the series, Reviewed-by: Greg Malysa <[email protected]> Thanks, Greg
