From: Du Huanpeng <[email protected]> - pll - spi controller - sdram
Signed-off-by: Du Huanpeng <[email protected]> --- .../mach-loongson/ls1c300/lowlevel_init.S | 134 ++++++++++++++++++ arch/mips/mach-loongson/ls1c300/sdram.S | 95 +++++++++++++ 2 files changed, 229 insertions(+) create mode 100644 arch/mips/mach-loongson/ls1c300/lowlevel_init.S create mode 100644 arch/mips/mach-loongson/ls1c300/sdram.S diff --git a/arch/mips/mach-loongson/ls1c300/lowlevel_init.S b/arch/mips/mach-loongson/ls1c300/lowlevel_init.S new file mode 100644 index 00000000000..8d9ba97130c --- /dev/null +++ b/arch/mips/mach-loongson/ls1c300/lowlevel_init.S @@ -0,0 +1,134 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 MediaTek Inc. + * + * Author: Gao Weijie <[email protected]> + * + * Copyright (C) 2020-2023 Du Huanpeng <[email protected]> + */ + +#include <config.h> +#include <asm-offsets.h> +#include <asm/cacheops.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/asm.h> +#include <linux/sizes.h> + +/* PLL control register */ +#define NAND_BASE 0xbfe70000 +#define START_FREQ 0x8030 +#define CLK_DIV_PARAM 0x8034 +#define CPU_THROT 0xc010 + +/* START_FREQ */ +#define PLL_VALID 31 +#define Reserved_24 24 +#define FRAC_N 16 +#define M_PLL 8 +#define Reserved_4 4 +#define RST_TIME 2 +#define SDRAM_DIV 0 + #define SDRAM_DIV2 0 + #define SDRAM_DIV4 1 + #define SDRAM_DIV3 2 + +/* CLK_DIV_PARAM */ +#define PIX_DIV 24 +#define CAM_DIV 16 +#define CPU_DIV 8 +#define PIX_DIV_VALID 5 +#define PIX_SEL 4 +#define CAM_DIV_VALID 3 +#define CAM_SEL 2 +#define CPU_DIV_VALID 1 +#define CPU_SEL 0 + +/* Document: + * Freq_PLL = XIN *(M_PLL + FRAC_N)/4 + */ +#define XIN 24000000 +#define PLL_VALID_1 (1<<PLL_VALID) +#define PREP_M_PLL(Freq_PLL) (((Freq_PLL * 4) / XIN) << M_PLL) +#define PREP_SDRAM_DIV(div) (div<<SDRAM_DIV) +#define PREP_CPU_DIV(div1) ((0x80|div1)<<CPU_DIV | (div1&&div1)<<CPU_DIV_VALID) +#define PREP_PIX_DIV(div2) (div2<<PIX_DIV) +#define PREP_CAM_DIV(div3) (div3<<CAM_DIV) + +/* PLL @264MHz, CPU @132MHz, SDRAM @66MHz */ +#define CFG_START_FREQ (PLL_VALID_1 | PREP_M_PLL(264000000) | SDRAM_DIV2) +#define CFG_CLK_DIV_PARAM (PREP_CPU_DIV(2) | PREP_PIX_DIV(0x24) | PREP_CAM_DIV(0x24)) +#define CFG_CPU_THROT 15 + +/* SPI0 control register */ +#define SPI0_BASE 0xbfe80000 +#define SPCR 0 +#define SPSR 1 +#define TxFIFO 2 +#define RxFIFO 2 +#define SPER 3 +#define SFC_PARAM 4 + #define CLK_DIV 4 + #define DUAL_IO 3 + #define FAST_READ 2 + #define BURST_EN 1 + #define MEMORY_EN 0 +#define SFC_SOFTCS 5 +#define SFC_TIMING 6 + #define T_FAST 2 + #define T_CSH 0 + + .set noreorder +LEAF(ls1c300_pll_init) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) + li t0, NAND_BASE + li t1, CFG_START_FREQ + li t2, CFG_CLK_DIV_PARAM + li t3, CFG_CPU_THROT + + sw t3, CPU_THROT (t0) + sw t2, CLK_DIV_PARAM (t0) + sw t1, START_FREQ (t0) + + ori t2, 1<<CPU_SEL + sw t2, CLK_DIV_PARAM (t0) +#endif + jr ra + nop +END(ls1c300_pll_init) + +LEAF(ls1c300_spi_init) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) + li t0, SPI0_BASE + li t1, (1<<MEMORY_EN) | (1<<BURST_EN) | (1<<FAST_READ) | (1<<DUAL_IO) + sb t1, SFC_PARAM (t0) + li t2, (1<<T_FAST) | (1<<T_CSH) + sb t2, SFC_TIMING (t0) +#endif + jr ra + nop +END(ls1c300_spi_init) + +NESTED(lowlevel_init, 0, ra) + /* Save ra and do real lowlevel initialization */ + move s0, ra + /* Setup PLL @264MHz */ + PTR_LA t9, ls1c300_pll_init + jalr t9 + nop + + /* Setup SPI Dual IO@33MHz */ + PTR_LA t9, ls1c300_spi_init + jalr t9 + nop + + /* Setup external SDRAM @66MHz */ + PTR_LA t9, ls1c300_sdram_init + jalr t9 + nop + + move ra, s0 + jr ra + nop +END(lowlevel_init) diff --git a/arch/mips/mach-loongson/ls1c300/sdram.S b/arch/mips/mach-loongson/ls1c300/sdram.S new file mode 100644 index 00000000000..0dadd41adea --- /dev/null +++ b/arch/mips/mach-loongson/ls1c300/sdram.S @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020-2023 Du Huanpeng <[email protected]> + */ + +#include <config.h> +#include <asm-offsets.h> +#include <asm/cacheops.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/asm.h> +#include <linux/sizes.h> + +/* sdram control 64 bit register */ +#define SD_CONFIG 0xbfd00000 +#define SD_CONFIGHI 0x414 +#define SD_CONFIGLO 0x410 + +#define VALID 41 +#define HANG_UP 40 +#define DEF_SEL 39 +#define TWR 37 +#define TREF 25 +#define TRAS 21 +#define TRFC 17 +#define TRP 14 +#define TCL 11 +#define TRCD 8 + +#define SD_BIT 6 + #define SD_8BIT (0<<SD_BIT) + #define SD_16BIT (1<<SD_BIT) + #define SD_32BIT (2<<SD_BIT) +#define SD_CSIZE 3 + #define SD_CSIZE_512 (0<<SD_CSIZE) + #define SD_CSIZE_1K (1<<SD_CSIZE) + #define SD_CSIZE_2K (2<<SD_CSIZE) + #define SD_CSIZE_4K (3<<SD_CSIZE) + #define SD_CSIZE_256 (7<<SD_CSIZE) +#define SD_RSIZE 0 + #define SD_RSIZE_2K (0<<SD_RSIZE) + #define SD_RSIZE_4K (1<<SD_RSIZE) + #define SD_RSIZE_8K (2<<SD_RSIZE) + #define SD_RSIZE_16K (3<<SD_RSIZE) + +#define SD_CFG_1(tWR, tREF, tRAS, tRFC, tRP, tCL, tRCD) \ + ((tWR<<TWR)|(tREF<<TREF)|(tRAS<<TRAS)|(tRFC<<TRFC)|(tRP<<TRP)|(tCL<<TCL)|(tRCD<<TRCD)) +#define CFG_SD_0(b, c, r) \ + ((b<<SD_BIT)|(c<<SD_CSIZE)|(r<<SD_RSIZE)) +/* + * recommended values by ls1c300 user manual, + * tweak to fit your board. + */ +#define SD_CONFIG_133MHz SD_CFG_1(2, 0x818, 6, 8, 3, 3, 3) +#define SD_CONFIG_100MHz SD_CFG_1(2, 0x620, 5, 6, 2, 3, 2) +#define SD_CONFIG_75MHz SD_CFG_1(1, 0x494, 4, 5, 2, 2, 2) +#define SD_CONFIG_33MHz SD_CFG_1(1, 0x204, 2, 2, 1, 2, 1) + +#define SD_CONFIG_66MHz SD_CFG_1(1, 0x401, 4, 4, 2, 2, 2) + +#define SD_CONFIG64 (SD_CONFIG_66MHz | SD_16BIT | SD_CSIZE_1K | SD_RSIZE_8K) +#define CFG_SDCONFIGHI (SD_CONFIG64 /(1<<32)) +#define CFG_SDCONFIGLO (SD_CONFIG64 %(1<<32)) + + .set noreorder +/* + * Loongson ls1c300 SoC do not have onchip sram for initial stack, + * initialize the external sdram on reset as early as possiable. + */ +LEAF(ls1c300_sdram_init) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) + li t0, SD_CONFIG + li t1, CFG_SDCONFIGLO + li t2, CFG_SDCONFIGHI + +/* store twice as the hardware manual required. */ + sw t1, SD_CONFIGLO (t0) + sw t2, SD_CONFIGHI (t0) + sync + + sw t1, SD_CONFIGLO (t0) + sw t2, SD_CONFIGHI (t0) + sync + + ori t2, 1<<(VALID-32) + sw t1, SD_CONFIGLO (t0) + sw t2, SD_CONFIGHI (t0) + sync +#endif + jr ra + nop +END(ls1c300_sdram_init) + + -- 2.43.0
