From: Jonas Karlman <[email protected]> The Radxa ROCK 4D has a eMMC 5.1 / UFS 2.0 module connector.
Enable UFS related Kconfig options to support booting from UFS storage on ROCK 4D. Signed-off-by: Jonas Karlman <[email protected]> Signed-off-by: Alexey Charkov <[email protected]> --- configs/rock-4d-rk3576_defconfig | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/configs/rock-4d-rk3576_defconfig b/configs/rock-4d-rk3576_defconfig index 140a3e0ccd84..4c0827764d11 100644 --- a/configs/rock-4d-rk3576_defconfig +++ b/configs/rock-4d-rk3576_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y +CONFIG_SPL_GPIO=y CONFIG_SF_DEFAULT_SPEED=50000000 CONFIG_SF_DEFAULT_MODE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3576-rock-4d" @@ -19,8 +20,10 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3576-rock-4d.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_MAX_SIZE=0x40000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_DM_RESET=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_UFS_SUPPORT=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMINFO_MAP=y CONFIG_CMD_ADC=y @@ -30,6 +33,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MISC=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +CONFIG_CMD_UFS=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_RNG=y @@ -56,6 +60,7 @@ CONFIG_PHY_ROCKCHIP_USBDP=y CONFIG_DM_PMIC=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_RK8XX=y +CONFIG_SCSI=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y @@ -65,4 +70,6 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y +CONFIG_UFS=y +CONFIG_UFS_ROCKCHIP=y CONFIG_ERRNO_STR=y -- 2.52.0
