NanoPi M5 supports UFS modules to be inserted into its eMMC/UFS slot, using the on-chip UFS controller inside the RK3576 SoC.
Enable respective drivers in its default config to be able to load kernels from UFS. Signed-off-by: Alexey Charkov <[email protected]> --- configs/nanopi-m5-rk3576_defconfig | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/configs/nanopi-m5-rk3576_defconfig b/configs/nanopi-m5-rk3576_defconfig index 28427390a62b..558131bf81c5 100644 --- a/configs/nanopi-m5-rk3576_defconfig +++ b/configs/nanopi-m5-rk3576_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y +CONFIG_SPL_GPIO=y CONFIG_SF_DEFAULT_SPEED=50000000 CONFIG_SF_DEFAULT_MODE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3576-nanopi-m5" @@ -19,8 +20,10 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3576-nanopi-m5.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_MAX_SIZE=0x40000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_DM_RESET=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_UFS_SUPPORT=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMINFO_MAP=y CONFIG_CMD_ADC=y @@ -30,6 +33,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MISC=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +CONFIG_CMD_UFS=y CONFIG_CMD_USB=y CONFIG_CMD_ROCKUSB=y CONFIG_CMD_USB_MASS_STORAGE=y @@ -63,6 +67,7 @@ CONFIG_PHY_ROCKCHIP_USBDP=y CONFIG_DM_PMIC=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_RK8XX=y +CONFIG_SCSI=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y @@ -75,4 +80,6 @@ CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_UFS=y +CONFIG_UFS_ROCKCHIP=y CONFIG_ERRNO_STR=y -- 2.52.0
