Sync Linux kernel dwc3 changes from v5.10 to v5.11. The following files are preserved accross the import: Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c dwc3-layerscape.c ti_usb_phy.c
Skipping unused files: debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c Note that this is a raw import and doesn't build. A fixup commit at the end of the series fixes that. List of commits: git log --oneline v5.10..v5.11 Commits imported: 0e5a3c8284a3 usb: dwc3: fix clock issue during resume in OTG mode a5c7682aaaa1 usb: dwc3: gadget: Clear wait flag on dequeue a1383b3537a7 usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup e5f4ca3fce90 usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression fca3f1381057 usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one ce722da66d3e usb: dwc3: ulpi: Use VStsDone to detect PHY regs access completion a5ada3dfe6a2 usb: dwc3: meson-g12a: disable clk on error handling path in probe Signed-off-by: Jens Wiklander <[email protected]> --- drivers/usb/dwc3/core.c | 2 +- drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/gadget.c | 16 +++++----------- 3 files changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 841daec70b6e..3101f0dcf6ae 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1758,7 +1758,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) if (PMSG_IS_AUTO(msg)) break; - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 2f95f08ca511..1b241f937d8f 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -285,6 +285,7 @@ /* Global USB2 PHY Vendor Control Register */ #define DWC3_GUSB2PHYACC_NEWREGREQ BIT(25) +#define DWC3_GUSB2PHYACC_DONE BIT(24) #define DWC3_GUSB2PHYACC_BUSY BIT(23) #define DWC3_GUSB2PHYACC_WRITE BIT(22) #define DWC3_GUSB2PHYACC_ADDR(n) (n << 16) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 78cb4db8a6e4..ee44321fee38 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1763,6 +1763,8 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, list_for_each_entry_safe(r, t, &dep->started_list, list) dwc3_gadget_move_cancelled_request(r); + dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE; + goto out; } } @@ -2083,6 +2085,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) static void dwc3_gadget_disable_irq(struct dwc3 *dwc); static void __dwc3_gadget_stop(struct dwc3 *dwc); +static int __dwc3_gadget_start(struct dwc3 *dwc); static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { @@ -2145,6 +2148,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % dwc->ev_buf->length; } + } else { + __dwc3_gadget_start(dwc); } ret = dwc3_gadget_run_stop(dwc, is_on, false); @@ -2319,10 +2324,6 @@ static int dwc3_gadget_start(struct usb_gadget *g, } dwc->gadget_driver = driver; - - if (pm_runtime_active(dwc->dev)) - __dwc3_gadget_start(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); return 0; @@ -2348,13 +2349,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g) unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); - - if (pm_runtime_suspended(dwc->dev)) - goto out; - - __dwc3_gadget_stop(dwc); - -out: dwc->gadget_driver = NULL; spin_unlock_irqrestore(&dwc->lock, flags); -- 2.43.0
