Sync Linux kernel dwc3 changes from v5.14 to v5.15. The following files are preserved accross the import: Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c dwc3-layerscape.c ti_usb_phy.c
Skipping unused files: debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c Note that this is a raw import and doesn't build. A fixup commit at the end of the series fixes that. List of commits: git log --oneline v5.14..v5.15 Commits imported: 268bbde716e3 usb: dwc3: gadget: Revert "set gadgets parent to the right controller" 8cfac9a6744f usb: dwc3: core: balance phy init and exit 07281a257a68 Merge tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 1abade64563e usb: dwc3: pci: add support for AMD's newer generation platform. 6a48d0ae01a6 usb: dwc3: imx8mp: request irq after initializing dwc3 843714bb37d9 usb: dwc3: Decouple USB 2.0 L1 & L2 events 2dec48c32a34 Merge 5.14-rc6 into usb-next 175006956740 usb: dwc3: qcom: add IRQ check baa2986bda3f usb: dwc3: meson-g12a: add IRQ check 73e19de7b79a Merge 5.14-rc5 into usb-next 0132bf6f3958 drivers: usb: dwc3-qcom: Add sdm660 compatible c6e23b89a95d usb: dwc3: gadget: set gadgets parent to the right controller 26f94fe8e739 usb: dwc3: drd: use helper to get role-switch-default-mode d842bc6c0579 Merge v5.14-rc3 into usb-next 8e6cb5d27e82 usb: dwc3: dwc3-qcom: Fix typo in the dwc3 vbus override API cefdd52fa045 usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default 9f607a309fbe usb: dwc3: Resize TX FIFOs to meet EP bursting requirements Signed-off-by: Jens Wiklander <[email protected]> --- drivers/usb/dwc3/core.c | 54 ++++++--- drivers/usb/dwc3/core.h | 21 +++- drivers/usb/dwc3/ep0.c | 2 + drivers/usb/dwc3/gadget.c | 232 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 290 insertions(+), 19 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ba74ad7f6995..0104a80b185e 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -264,19 +264,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; int retries = 1000; - int ret; - - usb_phy_init(dwc->usb2_phy); - usb_phy_init(dwc->usb3_phy); - ret = phy_init(dwc->usb2_generic_phy); - if (ret < 0) - return ret; - - ret = phy_init(dwc->usb3_generic_phy); - if (ret < 0) { - phy_exit(dwc->usb2_generic_phy); - return ret; - } /* * We're resetting only the device side because, if we're in host mode, @@ -310,9 +297,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) udelay(1); } while (--retries); - phy_exit(dwc->usb3_generic_phy); - phy_exit(dwc->usb2_generic_phy); - return -ETIMEDOUT; done: @@ -982,9 +966,21 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->phys_ready = true; } + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + goto err0a; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) { + phy_exit(dwc->usb2_generic_phy); + goto err0a; + } + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0a; + goto err1; if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { @@ -1050,6 +1046,15 @@ static int dwc3_core_init(struct dwc3 *dwc) if (!DWC3_VER_IS_PRIOR(DWC3, 290A)) reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW; + /* + * Decouple USB 2.0 L1 & L2 events which will allow for + * gadget driver to only receive U3/L2 suspend & wakeup + * events and prevent the more frequent L1 LPM transitions + * from interrupting the driver. + */ + if (!DWC3_VER_IS_PRIOR(DWC3, 300A)) + reg |= DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT; + if (dwc->dis_tx_ipgap_linecheck_quirk) reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS; @@ -1267,6 +1272,7 @@ static void dwc3_get_properties(struct dwc3 *dwc) u8 rx_max_burst_prd; u8 tx_thr_num_pkt_prd; u8 tx_max_burst_prd; + u8 tx_fifo_resize_max_num; const char *usb_psy_name; int ret; @@ -1282,6 +1288,13 @@ static void dwc3_get_properties(struct dwc3 *dwc) */ hird_threshold = 12; + /* + * default to a TXFIFO size large enough to fit 6 max packets. This + * allows for systems with larger bus latencies to have some headroom + * for endpoints that have a large bMaxBurst value. + */ + tx_fifo_resize_max_num = 6; + dwc->maximum_speed = usb_get_maximum_speed(dev); dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev); dwc->dr_mode = usb_get_dr_mode(dev); @@ -1325,6 +1338,11 @@ static void dwc3_get_properties(struct dwc3 *dwc) &tx_thr_num_pkt_prd); device_property_read_u8(dev, "snps,tx-max-burst-prd", &tx_max_burst_prd); + dwc->do_fifo_resize = device_property_read_bool(dev, + "tx-fifo-resize"); + if (dwc->do_fifo_resize) + device_property_read_u8(dev, "tx-fifo-max-num", + &tx_fifo_resize_max_num); dwc->disable_scramble_quirk = device_property_read_bool(dev, "snps,disable_scramble_quirk"); @@ -1390,6 +1408,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) dwc->tx_max_burst_prd = tx_max_burst_prd; dwc->imod_interval = 0; + + dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num; } /* check whether the core supports IMOD */ diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 5991766239ba..5612bfdf37da 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -256,9 +256,10 @@ #define DWC3_GUCTL_HSTINAUTORETRY BIT(14) /* Global User Control 1 Register */ -#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) +#define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT BIT(31) #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) -#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) +#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) +#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) /* Global Status Register */ #define DWC3_GSTS_OTG_IP BIT(10) @@ -1023,6 +1024,7 @@ struct dwc3_scratchpad_array { * @rx_max_burst_prd: max periodic ESS receive burst size * @tx_thr_num_pkt_prd: periodic ESS transmit packet count * @tx_max_burst_prd: max periodic ESS transmit burst size + * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize * @hsphy_interface: "utmi" or "ulpi" * @connected: true when we're connected to a host, false otherwise * @delayed_status: true when gadget driver asks for delayed status @@ -1037,6 +1039,7 @@ struct dwc3_scratchpad_array { * 1 - utmi_l1_suspend_n * @is_fpga: true when we are using the FPGA board * @pending_events: true when we have pending IRQs to be handled + * @do_fifo_resize: true when txfifo resizing is enabled for dwc3 endpoints * @pullups_connected: true when Run/Stop bit is set * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @three_stage_setup: set if we perform a three phase setup @@ -1079,6 +1082,11 @@ struct dwc3_scratchpad_array { * @dis_split_quirk: set to disable split boundary. * @imod_interval: set the interrupt moderation interval in 250ns * increments or 0 to disable. + * @max_cfg_eps: current max number of IN eps used across all USB configs. + * @last_fifo_depth: last fifo depth used to determine next fifo ram start + * address. + * @num_ep_resized: carries the current number endpoints which have had its tx + * fifo resized. */ struct dwc3 { struct work_struct drd_work; @@ -1233,6 +1241,7 @@ struct dwc3 { u8 rx_max_burst_prd; u8 tx_thr_num_pkt_prd; u8 tx_max_burst_prd; + u8 tx_fifo_resize_max_num; const char *hsphy_interface; @@ -1246,6 +1255,7 @@ struct dwc3 { unsigned is_utmi_l1_suspend:1; unsigned is_fpga:1; unsigned pending_events:1; + unsigned do_fifo_resize:1; unsigned pullups_connected:1; unsigned setup_packet_pending:1; unsigned three_stage_setup:1; @@ -1282,6 +1292,10 @@ struct dwc3 { unsigned async_callbacks:1; u16 imod_interval; + + int max_cfg_eps; + int last_fifo_depth; + int num_ep_resized; }; #define INCRX_BURST_MODE 0 @@ -1513,6 +1527,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, struct dwc3_gadget_ep_cmd_params *params); int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd, u32 param); +void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc); #else static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } @@ -1532,6 +1547,8 @@ static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param) { return 0; } +static inline void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc) +{ } #endif #if IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 2f9e45eed228..658739410992 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -621,6 +621,8 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) return -EINVAL; case USB_STATE_ADDRESS: + dwc3_gadget_clear_tx_fifos(dwc); + ret = dwc3_ep0_delegate_req(dwc, ctrl); /* if the cfg matches and the cfg is non zero */ if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) { diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index ccb68fe6202e..4519d06c9ca2 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -631,6 +631,187 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt); +/** + * dwc3_gadget_calc_tx_fifo_size - calculates the txfifo size value + * @dwc: pointer to the DWC3 context + * @nfifos: number of fifos to calculate for + * + * Calculates the size value based on the equation below: + * + * DWC3 revision 280A and prior: + * fifo_size = mult * (max_packet / mdwidth) + 1; + * + * DWC3 revision 290A and onwards: + * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1 + * + * The max packet size is set to 1024, as the txfifo requirements mainly apply + * to super speed USB use cases. However, it is safe to overestimate the fifo + * allocations for other scenarios, i.e. high speed USB. + */ +static int dwc3_gadget_calc_tx_fifo_size(struct dwc3 *dwc, int mult) +{ + int max_packet = 1024; + int fifo_size; + int mdwidth; + + mdwidth = dwc3_mdwidth(dwc); + + /* MDWIDTH is represented in bits, we need it in bytes */ + mdwidth >>= 3; + + if (DWC3_VER_IS_PRIOR(DWC3, 290A)) + fifo_size = mult * (max_packet / mdwidth) + 1; + else + fifo_size = mult * ((max_packet + mdwidth) / mdwidth) + 1; + return fifo_size; +} + +/** + * dwc3_gadget_clear_tx_fifo_size - Clears txfifo allocation + * @dwc: pointer to the DWC3 context + * + * Iterates through all the endpoint registers and clears the previous txfifo + * allocations. + */ +void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + int fifo_depth; + int size; + int num; + + if (!dwc->do_fifo_resize) + return; + + /* Read ep0IN related TXFIFO size */ + dep = dwc->eps[1]; + size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0)); + if (DWC3_IP_IS(DWC3)) + fifo_depth = DWC3_GTXFIFOSIZ_TXFDEP(size); + else + fifo_depth = DWC31_GTXFIFOSIZ_TXFDEP(size); + + dwc->last_fifo_depth = fifo_depth; + /* Clear existing TXFIFO for all IN eps except ep0 */ + for (num = 3; num < min_t(int, dwc->num_eps, DWC3_ENDPOINTS_NUM); + num += 2) { + dep = dwc->eps[num]; + /* Don't change TXFRAMNUM on usb31 version */ + size = DWC3_IP_IS(DWC3) ? 0 : + dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1)) & + DWC31_GTXFIFOSIZ_TXFRAMNUM; + + dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1), size); + } + dwc->num_ep_resized = 0; +} + +/* + * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case + * @dwc: pointer to our context structure + * + * This function will a best effort FIFO allocation in order + * to improve FIFO usage and throughput, while still allowing + * us to enable as many endpoints as possible. + * + * Keep in mind that this operation will be highly dependent + * on the configured size for RAM1 - which contains TxFifo -, + * the amount of endpoints enabled on coreConsultant tool, and + * the width of the Master Bus. + * + * In general, FIFO depths are represented with the following equation: + * + * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1 + * + * In conjunction with dwc3_gadget_check_config(), this resizing logic will + * ensure that all endpoints will have enough internal memory for one max + * packet per endpoint. + */ +static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + int fifo_0_start; + int ram1_depth; + int fifo_size; + int min_depth; + int num_in_ep; + int remaining; + int num_fifos = 1; + int fifo; + int tmp; + + if (!dwc->do_fifo_resize) + return 0; + + /* resize IN endpoints except ep0 */ + if (!usb_endpoint_dir_in(dep->endpoint.desc) || dep->number <= 1) + return 0; + + ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7); + + if ((dep->endpoint.maxburst > 1 && + usb_endpoint_xfer_bulk(dep->endpoint.desc)) || + usb_endpoint_xfer_isoc(dep->endpoint.desc)) + num_fifos = 3; + + if (dep->endpoint.maxburst > 6 && + usb_endpoint_xfer_bulk(dep->endpoint.desc) && DWC3_IP_IS(DWC31)) + num_fifos = dwc->tx_fifo_resize_max_num; + + /* FIFO size for a single buffer */ + fifo = dwc3_gadget_calc_tx_fifo_size(dwc, 1); + + /* Calculate the number of remaining EPs w/o any FIFO */ + num_in_ep = dwc->max_cfg_eps; + num_in_ep -= dwc->num_ep_resized; + + /* Reserve at least one FIFO for the number of IN EPs */ + min_depth = num_in_ep * (fifo + 1); + remaining = ram1_depth - min_depth - dwc->last_fifo_depth; + remaining = max_t(int, 0, remaining); + /* + * We've already reserved 1 FIFO per EP, so check what we can fit in + * addition to it. If there is not enough remaining space, allocate + * all the remaining space to the EP. + */ + fifo_size = (num_fifos - 1) * fifo; + if (remaining < fifo_size) + fifo_size = remaining; + + fifo_size += fifo; + /* Last increment according to the TX FIFO size equation */ + fifo_size++; + + /* Check if TXFIFOs start at non-zero addr */ + tmp = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0)); + fifo_0_start = DWC3_GTXFIFOSIZ_TXFSTADDR(tmp); + + fifo_size |= (fifo_0_start + (dwc->last_fifo_depth << 16)); + if (DWC3_IP_IS(DWC3)) + dwc->last_fifo_depth += DWC3_GTXFIFOSIZ_TXFDEP(fifo_size); + else + dwc->last_fifo_depth += DWC31_GTXFIFOSIZ_TXFDEP(fifo_size); + + /* Check fifo size allocation doesn't exceed available RAM size. */ + if (dwc->last_fifo_depth >= ram1_depth) { + dev_err(dwc->dev, "Fifosize(%d) > RAM size(%d) %s depth:%d\n", + dwc->last_fifo_depth, ram1_depth, + dep->endpoint.name, fifo_size); + if (DWC3_IP_IS(DWC3)) + fifo_size = DWC3_GTXFIFOSIZ_TXFDEP(fifo_size); + else + fifo_size = DWC31_GTXFIFOSIZ_TXFDEP(fifo_size); + + dwc->last_fifo_depth -= fifo_size; + return -ENOMEM; + } + + dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1), fifo_size); + dwc->num_ep_resized++; + + return 0; +} + /** * __dwc3_gadget_ep_enable - initializes a hw endpoint * @dep: endpoint to be initialized @@ -648,6 +829,10 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) int ret; if (!(dep->flags & DWC3_EP_ENABLED)) { + ret = dwc3_gadget_resize_tx_fifos(dep); + if (ret) + return ret; + ret = dwc3_gadget_start_config(dep); if (ret) return ret; @@ -2508,6 +2693,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g) spin_lock_irqsave(&dwc->lock, flags); dwc->gadget_driver = NULL; + dwc->max_cfg_eps = 0; spin_unlock_irqrestore(&dwc->lock, flags); free_irq(dwc->irq_gadget, dwc->ev_buf); @@ -2595,6 +2781,51 @@ static int dwc3_gadget_vbus_draw(struct usb_gadget *g, unsigned int mA) return ret; } +/** + * dwc3_gadget_check_config - ensure dwc3 can support the USB configuration + * @g: pointer to the USB gadget + * + * Used to record the maximum number of endpoints being used in a USB composite + * device. (across all configurations) This is to be used in the calculation + * of the TXFIFO sizes when resizing internal memory for individual endpoints. + * It will help ensured that the resizing logic reserves enough space for at + * least one max packet. + */ +static int dwc3_gadget_check_config(struct usb_gadget *g) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + struct usb_ep *ep; + int fifo_size = 0; + int ram1_depth; + int ep_num = 0; + + if (!dwc->do_fifo_resize) + return 0; + + list_for_each_entry(ep, &g->ep_list, ep_list) { + /* Only interested in the IN endpoints */ + if (ep->claimed && (ep->address & USB_DIR_IN)) + ep_num++; + } + + if (ep_num <= dwc->max_cfg_eps) + return 0; + + /* Update the max number of eps in the composition */ + dwc->max_cfg_eps = ep_num; + + fifo_size = dwc3_gadget_calc_tx_fifo_size(dwc, dwc->max_cfg_eps); + /* Based on the equation, increment by one for every ep */ + fifo_size += dwc->max_cfg_eps; + + /* Check if we can fit a single fifo per endpoint */ + ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7); + if (fifo_size > ram1_depth) + return -ENOMEM; + + return 0; +} + static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable) { struct dwc3 *dwc = gadget_to_dwc(g); @@ -2616,6 +2847,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { .udc_set_ssp_rate = dwc3_gadget_set_ssp_rate, .get_config_params = dwc3_gadget_config_params, .vbus_draw = dwc3_gadget_vbus_draw, + .check_config = dwc3_gadget_check_config, .udc_async_callbacks = dwc3_gadget_async_callbacks, }; -- 2.43.0
