From: Alice Guo <[email protected]> Switch the i.MX93 FRDM board to use the upstream device tree instead of maintaining a local copy.
Signed-off-by: Alice Guo <[email protected]> --- arch/arm/dts/Makefile | 1 - arch/arm/dts/imx93-11x11-frdm.dts | 603 -------------------------------------- arch/arm/mach-imx/imx9/Kconfig | 1 + configs/imx93_frdm_defconfig | 2 +- 4 files changed, 2 insertions(+), 605 deletions(-) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e79cfb4b633..d879eee3150 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -896,7 +896,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mq-librem5-r4.dtb dtb-$(CONFIG_ARCH_IMX9) += \ - imx93-11x11-frdm.dtb \ imx93-var-som-symphony.dtb dtb-$(CONFIG_ARCH_IMXRT) += imxrt1020-evk.dtb \ diff --git a/arch/arm/dts/imx93-11x11-frdm.dts b/arch/arm/dts/imx93-11x11-frdm.dts deleted file mode 100644 index 993567e767d..00000000000 --- a/arch/arm/dts/imx93-11x11-frdm.dts +++ /dev/null @@ -1,603 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/dts-v1/; - -#include <dt-bindings/usb/pd.h> -#include "imx93.dtsi" - -/ { - compatible = "fsl,imx93-11x11-frdm", "fsl,imx93"; - model = "NXP i.MX93 11X11 FRDM board"; - - aliases { - mmc0 = &usdhc1; /* EMMC */ - mmc1 = &usdhc2; /* uSD */ - rtc0 = &pcf2131; - serial0 = &lpuart1; - }; - - chosen { - stdout-path = &lpuart1; - }; - - reg_vref_1v8: regulator-adc-vref { - compatible = "regulator-fixed"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vref_1v8"; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - off-on-delay-us = <12000>; - pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; - pinctrl-names = "default"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "VSD_3V3"; - gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usdhc3_vmmc: regulator-usdhc3 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "WLAN_EN"; - gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * IW612 wifi chip needs more delay than other wifi chips to complete - * the host interface initialization after power up, otherwise the - * internal state of IW612 may be unstable, resulting in the failure of - * the SDIO3.0 switch voltage. - */ - startup-delay-us = <20000>; - }; - - reserved-memory { - ranges; - #address-cells = <2>; - #size-cells = <2>; - - linux,cma { - compatible = "shared-dma-pool"; - alloc-ranges = <0 0x80000000 0 0x30000000>; - reusable; - size = <0 0x10000000>; - linux,cma-default; - }; - - rsc_table: rsc-table@2021e000 { - reg = <0 0x2021e000 0 0x1000>; - no-map; - }; - - vdev0vring0: vdev0vring0@a4000000 { - reg = <0 0xa4000000 0 0x8000>; - no-map; - }; - - vdev0vring1: vdev0vring1@a4008000 { - reg = <0 0xa4008000 0 0x8000>; - no-map; - }; - - vdev1vring0: vdev1vring0@a4010000 { - reg = <0 0xa4010000 0 0x8000>; - no-map; - }; - - vdev1vring1: vdev1vring1@a4018000 { - reg = <0 0xa4018000 0 0x8000>; - no-map; - }; - - vdevbuffer: vdevbuffer@a4020000 { - compatible = "shared-dma-pool"; - reg = <0 0xa4020000 0 0x100000>; - no-map; - }; - }; - - usdhc3_pwrseq: usdhc3_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>; - }; -}; - -&adc1 { - vref-supply = <®_vref_1v8>; - status = "okay"; -}; - -&eqos { - phy-handle = <ðphy1>; - phy-mode = "rgmii-id"; - pinctrl-0 = <&pinctrl_eqos>; - pinctrl-1 = <&pinctrl_eqos_sleep>; - pinctrl-names = "default", "sleep"; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <5000000>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&fec { - phy-handle = <ðphy2>; - phy-mode = "rgmii-id"; - pinctrl-0 = <&pinctrl_fec>; - pinctrl-1 = <&pinctrl_fec_sleep>; - pinctrl-names = "default", "sleep"; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <5000000>; - - ethphy2: ethernet-phy@2 { - reg = <2>; - eee-broken-1000t; - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&lpi2c2 { - clock-frequency = <400000>; - pinctrl-0 = <&pinctrl_lpi2c2>; - pinctrl-names = "default"; - status = "okay"; - - pcal6524: gpio@22 { - compatible = "nxp,pcal6524"; - reg = <0x22>; - #interrupt-cells = <2>; - interrupt-controller; - interrupt-parent = <&gpio3>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - #gpio-cells = <2>; - gpio-controller; - pinctrl-0 = <&pinctrl_pcal6524>; - pinctrl-names = "default"; - }; - - pmic@25 { - compatible = "nxp,pca9451a"; - reg = <0x25>; - interrupt-parent = <&pcal6524>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - - regulators { - - buck1: BUCK1 { - regulator-name = "BUCK1"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <2237500>; - regulator-ramp-delay = <3125>; - }; - - buck2: BUCK2 { - regulator-name = "BUCK2"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; - regulator-ramp-delay = <3125>; - }; - - buck4: BUCK4 { - regulator-name = "BUCK4"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; - }; - - buck5: BUCK5 { - regulator-name = "BUCK5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; - }; - - buck6: BUCK6 { - regulator-name = "BUCK6"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; - }; - - ldo1: LDO1 { - regulator-name = "LDO1"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; - }; - - ldo4: LDO4 { - regulator-name = "LDO4"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - - ldo5: LDO5 { - regulator-name = "LDO5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; - - eeprom: eeprom@50 { - compatible = "atmel,24c256"; - reg = <0x50>; - pagesize = <64>; - }; -}; - -&lpi2c3 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <400000>; - pinctrl-0 = <&pinctrl_lpi2c3>; - pinctrl-names = "default"; - status = "okay"; - - ptn5110: tcpc@50 { - compatible = "nxp,ptn5110", "tcpci"; - reg = <0x50>; - interrupt-parent = <&gpio3>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - - typec1_con: connector { - compatible = "usb-c-connector"; - data-role = "dual"; - label = "USB-C"; - op-sink-microwatt = <15000000>; - power-role = "dual"; - self-powered; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(5000, 20000, 3000)>; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - try-power-role = "sink"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - typec1_dr_sw: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; - }; - }; - }; - }; - - pcf2131: rtc@53 { - compatible = "nxp,pcf2131"; - reg = <0x53>; - interrupt-parent = <&pcal6524>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - }; -}; - -&lpuart1 { /* console */ - pinctrl-0 = <&pinctrl_uart1>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usbotg1 { - adp-disable; - disable-over-current; - dr_mode = "otg"; - hnp-disable; - srp-disable; - usb-role-switch; - samsung,picophy-dc-vol-level-adjust = <7>; - samsung,picophy-pre-emp-curr-control = <3>; - status = "okay"; - - port { - - usb1_drd_sw: endpoint { - remote-endpoint = <&typec1_dr_sw>; - }; - }; -}; - -&usbotg2 { - disable-over-current; - dr_mode = "host"; - samsung,picophy-dc-vol-level-adjust = <7>; - samsung,picophy-pre-emp-curr-control = <3>; - status = "okay"; -}; - -&usdhc1 { - bus-width = <8>; - non-removable; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - status = "okay"; -}; - -&usdhc2 { - bus-width = <4>; - cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; - no-mmc; - no-sdio; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - -&wdog3 { - status = "okay"; -}; - -&iomuxc { - - pinctrl_eqos: eqosgrp { - fsl,pins = < - MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e - MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e - MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e - MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e - MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e - MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e - MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e - MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e - MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e - MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e - MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e - MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e - MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e - MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e - >; - }; - - pinctrl_eqos_sleep: eqossleepgrp { - fsl,pins = < - MX93_PAD_ENET1_MDC__GPIO4_IO00 0x31e - MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x31e - MX93_PAD_ENET1_RD0__GPIO4_IO10 0x31e - MX93_PAD_ENET1_RD1__GPIO4_IO11 0x31e - MX93_PAD_ENET1_RD2__GPIO4_IO12 0x31e - MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e - MX93_PAD_ENET1_RXC__GPIO4_IO09 0x31e - MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x31e - MX93_PAD_ENET1_TD0__GPIO4_IO05 0x31e - MX93_PAD_ENET1_TD1__GPIO4_IO04 0x31e - MX93_PAD_ENET1_TD2__GPIO4_IO03 0x31e - MX93_PAD_ENET1_TD3__GPIO4_IO02 0x31e - MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e - MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x31e - >; - }; - - pinctrl_fec: fecgrp { - fsl,pins = < - MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e - MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e - MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e - MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e - MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e - MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e - MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e - MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e - MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e - MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e - MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e - MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e - MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e - MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e - >; - }; - - pinctrl_fec_sleep: fecsleepgrp { - fsl,pins = < - MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e - MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e - MX93_PAD_ENET2_RD0__GPIO4_IO24 0x51e - MX93_PAD_ENET2_RD1__GPIO4_IO25 0x51e - MX93_PAD_ENET2_RD2__GPIO4_IO26 0x51e - MX93_PAD_ENET2_RD3__GPIO4_IO27 0x51e - MX93_PAD_ENET2_RXC__GPIO4_IO23 0x51e - MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e - MX93_PAD_ENET2_TD0__GPIO4_IO19 0x51e - MX93_PAD_ENET2_TD1__GPIO4_IO18 0x51e - MX93_PAD_ENET2_TD2__GPIO4_IO17 0x51e - MX93_PAD_ENET2_TD3__GPIO4_IO16 0x51e - MX93_PAD_ENET2_TXC__GPIO4_IO21 0x51e - MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX93_PAD_GPIO_IO25__CAN2_TX 0x139e - MX93_PAD_GPIO_IO27__CAN2_RX 0x139e - >; - }; - - pinctrl_lpi2c2: lpi2c2grp { - fsl,pins = < - MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e - MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e - >; - }; - - pinctrl_lpi2c3: lpi2c3grp { - fsl,pins = < - MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e - MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e - >; - }; - - pinctrl_pcal6524: pcal6524grp { - fsl,pins = < - MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e - >; - }; - - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { - fsl,pins = < - MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX93_PAD_UART1_RXD__LPUART1_RX 0x31e - MX93_PAD_UART1_TXD__LPUART1_TX 0x31e - >; - }; - - /* need to config the SION for data and cmd pad, refer to ERR052021 */ - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582 - MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382 - MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382 - MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382 - MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382 - MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382 - MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382 - MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382 - MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382 - MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382 - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582 - >; - }; - - /* need to config the SION for data and cmd pad, refer to ERR052021 */ - pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { - fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e - MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e - MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e - MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e - MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e - MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e - MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e - MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e - MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e - MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e - >; - }; - - /* need to config the SION for data and cmd pad, refer to ERR052021 */ - pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { - fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe - MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe - MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe - MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe - MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe - MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe - MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe - MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe - MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe - MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe - >; - }; - - pinctrl_usdhc2_gpio: usdhc2gpiogrp { - fsl,pins = < - MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e - >; - }; - - pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp { - fsl,pins = < - MX93_PAD_SD2_CD_B__GPIO3_IO00 0x51e - >; - }; - - /* need to config the SION for data and cmd pad, refer to ERR052021 */ - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582 - MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382 - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382 - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382 - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382 - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382 - MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e - >; - }; - - /* need to config the SION for data and cmd pad, refer to ERR052021 */ - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e - MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e - MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e - >; - }; - - /* need to config the SION for data and cmd pad, refer to ERR052021 */ - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe - MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe - MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e - >; - }; - - pinctrl_usdhc2_sleep: usdhc2-sleepgrp { - fsl,pins = < - MX93_PAD_SD2_CLK__GPIO3_IO01 0x51e - MX93_PAD_SD2_CMD__GPIO3_IO02 0x51e - MX93_PAD_SD2_DATA0__GPIO3_IO03 0x51e - MX93_PAD_SD2_DATA1__GPIO3_IO04 0x51e - MX93_PAD_SD2_DATA2__GPIO3_IO05 0x51e - MX93_PAD_SD2_DATA3__GPIO3_IO06 0x51e - MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e - >; - }; -}; diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig index 94958fc3c46..92cc688cbc7 100644 --- a/arch/arm/mach-imx/imx9/Kconfig +++ b/arch/arm/mach-imx/imx9/Kconfig @@ -115,6 +115,7 @@ config TARGET_IMX93_FRDM select REMOTEPROC_IMX select REGMAP select SYSCON + imply OF_UPSTREAM config TARGET_IMX93_VAR_SOM bool "imx93_var_som" diff --git a/configs/imx93_frdm_defconfig b/configs/imx93_frdm_defconfig index adcf2125c73..749879375fa 100644 --- a/configs/imx93_frdm_defconfig +++ b/configs/imx93_frdm_defconfig @@ -10,7 +10,7 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x700000 CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg" CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-frdm" +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx93-11x11-frdm" CONFIG_TARGET_IMX93_FRDM=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_SPL_SERIAL=y -- 2.34.1
