From: Alice Guo <[email protected]> Enable OF_UPSTREAM and remove local device tree files in favor of upstream device trees from Linux kernel.
Signed-off-by: Alice Guo <[email protected]> --- arch/arm/dts/Makefile | 3 - arch/arm/dts/imx93-var-som-symphony.dts | 323 ------------ arch/arm/dts/imx93-var-som.dtsi | 111 ---- arch/arm/dts/imx93.dtsi | 906 -------------------------------- arch/arm/mach-imx/imx9/Kconfig | 1 + configs/imx93_var_som_defconfig | 2 +- 6 files changed, 2 insertions(+), 1344 deletions(-) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d879eee3150..996fc2079e6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -895,9 +895,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mq-kontron-pitx-imx8m.dtb \ imx8mq-librem5-r4.dtb -dtb-$(CONFIG_ARCH_IMX9) += \ - imx93-var-som-symphony.dtb - dtb-$(CONFIG_ARCH_IMXRT) += imxrt1020-evk.dtb \ imxrt1170-evk.dtb \ diff --git a/arch/arm/dts/imx93-var-som-symphony.dts b/arch/arm/dts/imx93-var-som-symphony.dts deleted file mode 100644 index 1bc61942716..00000000000 --- a/arch/arm/dts/imx93-var-som-symphony.dts +++ /dev/null @@ -1,323 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2021 NXP - * Copyright 2023 Variscite Ltd. - */ - -/dts-v1/; - -#include "imx93-var-som.dtsi" - -/{ - model = "Variscite VAR-SOM-MX93 on Symphony evaluation board"; - compatible = "variscite,var-som-mx93-symphony", - "variscite,var-som-mx93", "fsl,imx93"; - - aliases { - ethernet0 = &eqos; - ethernet1 = &fec; - }; - - chosen { - stdout-path = &lpuart1; - }; - - /* - * Needed only for Symphony <= v1.5 - */ - reg_fec_phy: regulator-fec-phy { - compatible = "regulator-fixed"; - regulator-name = "fec-phy"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-enable-ramp-delay = <20000>; - gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; - off-on-delay-us = <20000>; - enable-active-high; - }; - - reg_vref_1v8: regulator-adc-vref { - compatible = "regulator-fixed"; - regulator-name = "vref_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - ethosu_mem: ethosu-region@88000000 { - compatible = "shared-dma-pool"; - reusable; - reg = <0x0 0x88000000 0x0 0x8000000>; - }; - - vdev0vring0: vdev0vring0@87ee0000 { - reg = <0 0x87ee0000 0 0x8000>; - no-map; - }; - - vdev0vring1: vdev0vring1@87ee8000 { - reg = <0 0x87ee8000 0 0x8000>; - no-map; - }; - - vdev1vring0: vdev1vring0@87ef0000 { - reg = <0 0x87ef0000 0 0x8000>; - no-map; - }; - - vdev1vring1: vdev1vring1@87ef8000 { - reg = <0 0x87ef8000 0 0x8000>; - no-map; - }; - - rsc_table: rsc-table@2021f000 { - reg = <0 0x2021f000 0 0x1000>; - no-map; - }; - - vdevbuffer: vdevbuffer@87f00000 { - compatible = "shared-dma-pool"; - reg = <0 0x87f00000 0 0x100000>; - no-map; - }; - - ele_reserved: ele-reserved@87de0000 { - compatible = "shared-dma-pool"; - reg = <0 0x87de0000 0 0x100000>; - no-map; - }; - }; -}; - -/* Use external instead of internal RTC*/ -&bbnsm_rtc { - status = "disabled"; -}; - -&eqos { - mdio { - ethphy1: ethernet-phy@5 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <5>; - qca,disable-smarteee; - eee-broken-1000t; - reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <20000>; - vddio-supply = <&vddio1>; - - vddio1: vddio-regulator { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "rgmii"; - phy-handle = <ðphy1>; - phy-supply = <®_fec_phy>; - status = "okay"; -}; - -&flexcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; -}; - -&iomuxc { - pinctrl_fec: fecgrp { - fsl,pins = < - MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e - MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e - MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e - MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e - MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe - MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e - MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e - MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e - MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e - MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e - MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe - MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX93_PAD_PDM_CLK__CAN1_TX 0x139e - MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e - >; - }; - - pinctrl_lpi2c1: lpi2c1grp { - fsl,pins = < - MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e - MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e - >; - }; - - pinctrl_lpi2c1_gpio: lpi2c1gpiogrp { - fsl,pins = < - MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e - MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e - >; - }; - - pinctrl_lpi2c5: lpi2c5grp { - fsl,pins = < - MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e - MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e - >; - }; - - pinctrl_lpi2c5_gpio: lpi2c5gpiogrp { - fsl,pins = < - MX93_PAD_GPIO_IO23__GPIO2_IO23 0x31e - MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e - >; - }; - - pinctrl_pca9534: pca9534grp { - fsl,pins = < - MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX93_PAD_UART1_RXD__LPUART1_RX 0x31e - MX93_PAD_UART1_TXD__LPUART1_TX 0x31e - >; - }; - - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { - fsl,pins = < - MX93_PAD_GPIO_IO18__GPIO2_IO18 0x31e - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe - MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe - MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e - >; - }; - - pinctrl_usdhc2_gpio: usdhc2gpiogrp { - fsl,pins = < - MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e - >; - }; -}; - -&lpi2c1 { - clock-frequency = <400000>; - pinctrl-names = "default", "sleep", "gpio"; - pinctrl-0 = <&pinctrl_lpi2c1>; - pinctrl-1 = <&pinctrl_lpi2c1_gpio>; - pinctrl-2 = <&pinctrl_lpi2c1_gpio>; - scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - status = "okay"; - - /* DS1337 RTC module */ - rtc@68 { - compatible = "dallas,ds1337"; - reg = <0x68>; - }; -}; - -&lpi2c5 { - clock-frequency = <400000>; - pinctrl-names = "default", "sleep", "gpio"; - pinctrl-0 = <&pinctrl_lpi2c5>; - pinctrl-1 = <&pinctrl_lpi2c5_gpio>; - pinctrl-2 = <&pinctrl_lpi2c5_gpio>; - scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; - status = "okay"; - - pca9534: gpio@20 { - compatible = "nxp,pca9534"; - reg = <0x20>; - gpio-controller; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pca9534>; - interrupt-parent = <&gpio3>; - interrupts = <26 IRQ_TYPE_EDGE_FALLING>; - #gpio-cells = <2>; - wakeup-source; - }; -}; - -/* Console */ -&lpuart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - clocks = <&clk IMX93_CLK_LPUART1_GATE>, <&clk IMX93_CLK_LPUART1_GATE>; - clock-names = "ipg", "per"; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - disable-over-current; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - hnp-disable; - srp-disable; - adp-disable; - disable-over-current; - status = "okay"; -}; - -/* SD */ -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_usdhc2_vmmc>; - bus-width = <4>; - status = "okay"; - no-sdio; - no-mmc; -}; - -/* Watchdog */ -&wdog3 { - status = "okay"; -}; diff --git a/arch/arm/dts/imx93-var-som.dtsi b/arch/arm/dts/imx93-var-som.dtsi deleted file mode 100644 index 6c77b886666..00000000000 --- a/arch/arm/dts/imx93-var-som.dtsi +++ /dev/null @@ -1,111 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 NXP - * Copyright 2023 Variscite Ltd. - */ - -/dts-v1/; - -#include "imx93.dtsi" - -/{ - model = "Variscite VAR-SOM-MX93 module"; - compatible = "variscite,var-som-mx93", "fsl,imx93"; - - mmc_pwrseq: mmc-pwrseq { - compatible = "mmc-pwrseq-simple"; - post-power-on-delay-ms = <100>; - power-off-delay-us = <10000>; - reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */ - <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */ - }; - - reg_eqos_phy: regulator-eqos-phy { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_eqos_phy>; - regulator-name = "eth_phy_pwr"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - startup-delay-us = <100000>; - regulator-always-on; - }; -}; - -&eqos { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eqos>; - phy-mode = "rgmii"; - phy-handle = <ðphy0>; - phy-supply = <®_eqos_phy>; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <1000000>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - eee-broken-1000t; - }; - }; -}; - -&iomuxc { - pinctrl_eqos: eqosgrp { - fsl,pins = < - MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e - MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e - MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e - MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e - MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e - MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e - MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe - MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e - MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e - MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e - MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e - MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e - MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe - MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e - >; - }; - - pinctrl_reg_eqos_phy: regeqosgrp { - fsl,pins = < - MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe - MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe - MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe - MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe - MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe - MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe - MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe - MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe - MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe - MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe - >; - }; -}; - -/* eMMC */ -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1>; - pinctrl-2 = <&pinctrl_usdhc1>; - bus-width = <8>; - non-removable; - status = "okay"; -}; diff --git a/arch/arm/dts/imx93.dtsi b/arch/arm/dts/imx93.dtsi deleted file mode 100644 index d6964714ea0..00000000000 --- a/arch/arm/dts/imx93.dtsi +++ /dev/null @@ -1,906 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 NXP - */ - -#include <dt-bindings/clock/imx93-clock.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/power/fsl,imx93-power.h> -#include <dt-bindings/thermal/thermal.h> - -#include "imx93-pinfunc.h" - -/ { - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - i2c0 = &lpi2c1; - i2c1 = &lpi2c2; - i2c2 = &lpi2c3; - i2c3 = &lpi2c4; - i2c4 = &lpi2c5; - i2c5 = &lpi2c6; - i2c6 = &lpi2c7; - i2c7 = &lpi2c8; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - mmc2 = &usdhc3; - serial0 = &lpuart1; - serial1 = &lpuart2; - serial2 = &lpuart3; - serial3 = &lpuart4; - serial4 = &lpuart5; - serial5 = &lpuart6; - serial6 = &lpuart7; - serial7 = &lpuart8; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - A55_0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0>; - enable-method = "psci"; - #cooling-cells = <2>; - }; - - A55_1: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x100>; - enable-method = "psci"; - #cooling-cells = <2>; - }; - - }; - - osc_32k: clock-osc-32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "osc_32k"; - }; - - osc_24m: clock-osc-24m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc_24m"; - }; - - clk_ext1: clock-ext1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <133000000>; - clock-output-names = "clk_ext1"; - }; - - pmu { - compatible = "arm,cortex-a55-pmu"; - interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; - clock-frequency = <24000000>; - arm,no-tick-in-suspend; - interrupt-parent = <&gic>; - }; - - gic: interrupt-controller@48000000 { - compatible = "arm,gic-v3"; - reg = <0 0x48000000 0 0x10000>, - <0 0x48040000 0 0xc0000>; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - }; - - thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <2000>; - - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <80000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <90000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>; - clock-names = "main_clk"; - }; - - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>; - clock-names = "main_clk"; - }; - - soc@0 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x80000000>, - <0x28000000 0x0 0x28000000 0x10000000>; - - aips1: bus@44000000 { - compatible = "fsl,aips-bus", "simple-bus"; - reg = <0x44000000 0x800000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - anomix_ns_gpr: syscon@44210000 { - compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon"; - reg = <0x44210000 0x1000>; - }; - - mu1: mailbox@44230000 { - compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; - reg = <0x44230000 0x10000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_MU1_B_GATE>; - #mbox-cells = <2>; - status = "disabled"; - }; - - system_counter: timer@44290000 { - compatible = "nxp,sysctr-timer"; - reg = <0x44290000 0x30000>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc_24m>; - clock-names = "per"; - nxp,no-divider; - }; - - tpm1: pwm@44310000 { - compatible = "fsl,imx7ulp-pwm"; - reg = <0x44310000 0x1000>; - clocks = <&clk IMX93_CLK_TPM1_GATE>; - #pwm-cells = <3>; - status = "disabled"; - }; - - tpm2: pwm@44320000 { - compatible = "fsl,imx7ulp-pwm"; - reg = <0x44320000 0x10000>; - clocks = <&clk IMX93_CLK_TPM2_GATE>; - #pwm-cells = <3>; - status = "disabled"; - }; - - lpi2c1: i2c@44340000 { - compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x44340000 0x10000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPI2C1_GATE>, - <&clk IMX93_CLK_BUS_AON>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpi2c2: i2c@44350000 { - compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x44350000 0x10000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPI2C2_GATE>, - <&clk IMX93_CLK_BUS_AON>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpspi1: spi@44360000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; - reg = <0x44360000 0x10000>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPSPI1_GATE>, - <&clk IMX93_CLK_BUS_AON>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpspi2: spi@44370000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; - reg = <0x44370000 0x10000>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPSPI2_GATE>, - <&clk IMX93_CLK_BUS_AON>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpuart1: serial@44380000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x44380000 0x1000>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPUART1_GATE>, <&clk IMX93_CLK_LPUART1_GATE>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - lpuart2: serial@44390000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x44390000 0x1000>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPUART2_GATE>; - clock-names = "ipg"; - status = "disabled"; - }; - - flexcan1: can@443a0000 { - compatible = "fsl,imx93-flexcan"; - reg = <0x443a0000 0x10000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_BUS_AON>, - <&clk IMX93_CLK_CAN1_GATE>; - clock-names = "ipg", "per"; - assigned-clocks = <&clk IMX93_CLK_CAN1>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; - assigned-clock-rates = <40000000>; - fsl,clk-source = /bits/ 8 <0>; - status = "disabled"; - }; - - iomuxc: pinctrl@443c0000 { - compatible = "fsl,imx93-iomuxc"; - reg = <0x443c0000 0x10000>; - status = "okay"; - }; - - bbnsm: bbnsm@44440000 { - compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd"; - reg = <0x44440000 0x10000>; - - bbnsm_rtc: rtc { - compatible = "nxp,imx93-bbnsm-rtc"; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - }; - - bbnsm_pwrkey: pwrkey { - compatible = "nxp,imx93-bbnsm-pwrkey"; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - linux,code = <KEY_POWER>; - }; - }; - - clk: clock-controller@44450000 { - compatible = "fsl,imx93-ccm"; - reg = <0x44450000 0x10000>; - #clock-cells = <1>; - clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; - clock-names = "osc_32k", "osc_24m", "clk_ext1"; - status = "okay"; - }; - - src: system-controller@44460000 { - compatible = "fsl,imx93-src", "syscon"; - reg = <0x44460000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mediamix: power-domain@44462400 { - compatible = "fsl,imx93-src-slice"; - reg = <0x44462400 0x400>, <0x44465800 0x400>; - #power-domain-cells = <0>; - clocks = <&clk IMX93_CLK_MEDIA_AXI>, - <&clk IMX93_CLK_MEDIA_APB>; - }; - - mlmix: power-domain@44461800 { - compatible = "fsl,imx93-src-slice"; - reg = <0x44461800 0x400>, <0x44464800 0x400>; - #power-domain-cells = <0>; - clocks = <&clk IMX93_CLK_ML_APB>, - <&clk IMX93_CLK_ML>; - }; - }; - - anatop: anatop@44480000 { - compatible = "fsl,imx93-anatop", "syscon"; - reg = <0x44480000 0x10000>; - }; - - tmu: tmu@44482000 { - compatible = "fsl,imx93-tmu"; - reg = <0x44482000 0x1000>; - clocks = <&clk IMX93_CLK_TMC_GATE>; - little-endian; - fsl,tmu-calibration = <0x0000000e 0x800000da - 0x00000029 0x800000e9 - 0x00000056 0x80000102 - 0x000000a2 0x8000012a - 0x00000116 0x80000166 - 0x00000195 0x800001a7 - 0x000001b2 0x800001b6>; - #thermal-sensor-cells = <1>; - }; - - adc1: adc@44530000 { - compatible = "nxp,imx93-adc"; - reg = <0x44530000 0x10000>; - interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_ADC1_GATE>; - clock-names = "ipg"; - #io-channel-cells = <1>; - status = "disabled"; - }; - }; - - aips2: bus@42000000 { - compatible = "fsl,aips-bus", "simple-bus"; - reg = <0x42000000 0x800000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - wakeupmix_gpr: syscon@42420000 { - compatible = "fsl,imx93-wakeupmix-syscfg", "syscon"; - reg = <0x42420000 0x1000>; - }; - - mu2: mailbox@42440000 { - compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; - reg = <0x42440000 0x10000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_MU2_B_GATE>; - #mbox-cells = <2>; - status = "disabled"; - }; - - wdog3: wdog@42490000 { - compatible = "fsl,imx93-wdt"; - reg = <0x42490000 0x10000>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_WDOG3_GATE>; - timeout-sec = <40>; - }; - - tpm3: pwm@424e0000 { - compatible = "fsl,imx7ulp-pwm"; - reg = <0x424e0000 0x1000>; - clocks = <&clk IMX93_CLK_TPM3_GATE>; - #pwm-cells = <3>; - status = "disabled"; - }; - - tpm4: pwm@424f0000 { - compatible = "fsl,imx7ulp-pwm"; - reg = <0x424f0000 0x10000>; - clocks = <&clk IMX93_CLK_TPM4_GATE>; - #pwm-cells = <3>; - status = "disabled"; - }; - - tpm5: pwm@42500000 { - compatible = "fsl,imx7ulp-pwm"; - reg = <0x42500000 0x10000>; - clocks = <&clk IMX93_CLK_TPM5_GATE>; - #pwm-cells = <3>; - status = "disabled"; - }; - - tpm6: pwm@42510000 { - compatible = "fsl,imx7ulp-pwm"; - reg = <0x42510000 0x10000>; - clocks = <&clk IMX93_CLK_TPM6_GATE>; - #pwm-cells = <3>; - status = "disabled"; - }; - - lpi2c3: i2c@42530000 { - compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x42530000 0x10000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPI2C3_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpi2c4: i2c@42540000 { - compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x42540000 0x10000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPI2C4_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpspi3: spi@42550000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; - reg = <0x42550000 0x10000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPSPI3_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpspi4: spi@42560000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; - reg = <0x42560000 0x10000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPSPI4_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpuart3: serial@42570000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x42570000 0x1000>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPUART3_GATE>; - clock-names = "ipg"; - status = "disabled"; - }; - - lpuart4: serial@42580000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x42580000 0x1000>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPUART4_GATE>; - clock-names = "ipg"; - status = "disabled"; - }; - - lpuart5: serial@42590000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x42590000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPUART5_GATE>; - clock-names = "ipg"; - status = "disabled"; - }; - - lpuart6: serial@425a0000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x425a0000 0x1000>; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPUART6_GATE>; - clock-names = "ipg"; - status = "disabled"; - }; - - flexcan2: can@425b0000 { - compatible = "fsl,imx93-flexcan"; - reg = <0x425b0000 0x10000>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_BUS_WAKEUP>, - <&clk IMX93_CLK_CAN2_GATE>; - clock-names = "ipg", "per"; - assigned-clocks = <&clk IMX93_CLK_CAN2>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; - assigned-clock-rates = <40000000>; - fsl,clk-source = /bits/ 8 <0>; - status = "disabled"; - }; - - flexspi1: spi@425e0000 { - compatible = "nxp,imx8mm-fspi"; - reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>; - reg-names = "fspi_base", "fspi_mmap"; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>, - <&clk IMX93_CLK_FLEXSPI1_GATE>; - clock-names = "fspi_en", "fspi"; - assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>; - status = "disabled"; - }; - - lpuart7: serial@42690000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x42690000 0x1000>; - interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPUART7_GATE>; - clock-names = "ipg"; - status = "disabled"; - }; - - lpuart8: serial@426a0000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; - reg = <0x426a0000 0x1000>; - interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPUART8_GATE>; - clock-names = "ipg"; - status = "disabled"; - }; - - lpi2c5: i2c@426b0000 { - compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x426b0000 0x10000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPI2C5_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpi2c6: i2c@426c0000 { - compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x426c0000 0x10000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPI2C6_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpi2c7: i2c@426d0000 { - compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x426d0000 0x10000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPI2C7_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpi2c8: i2c@426e0000 { - compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; - reg = <0x426e0000 0x10000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPI2C8_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpspi5: spi@426f0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; - reg = <0x426f0000 0x10000>; - interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPSPI5_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpspi6: spi@42700000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; - reg = <0x42700000 0x10000>; - interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPSPI6_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpspi7: spi@42710000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; - reg = <0x42710000 0x10000>; - interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPSPI7_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - lpspi8: spi@42720000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; - reg = <0x42720000 0x10000>; - interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_LPSPI8_GATE>, - <&clk IMX93_CLK_BUS_WAKEUP>; - clock-names = "per", "ipg"; - status = "disabled"; - }; - - }; - - aips3: bus@42800000 { - compatible = "fsl,aips-bus", "simple-bus"; - reg = <0x42800000 0x800000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usdhc1: mmc@42850000 { - compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; - reg = <0x42850000 0x10000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_BUS_WAKEUP>, - <&clk IMX93_CLK_WAKEUP_AXI>, - <&clk IMX93_CLK_USDHC1_GATE>; - clock-names = "ipg", "ahb", "per"; - bus-width = <8>; - fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; - status = "disabled"; - }; - - usdhc2: mmc@42860000 { - compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; - reg = <0x42860000 0x10000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_BUS_WAKEUP>, - <&clk IMX93_CLK_WAKEUP_AXI>, - <&clk IMX93_CLK_USDHC2_GATE>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; - status = "disabled"; - }; - - eqos: ethernet@428a0000 { - compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; - reg = <0x428a0000 0x10000>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - clocks = <&clk IMX93_CLK_ENET_QOS_GATE>, - <&clk IMX93_CLK_ENET_QOS_GATE>, - <&clk IMX93_CLK_ENET_TIMER2>, - <&clk IMX93_CLK_ENET>, - <&clk IMX93_CLK_ENET_QOS_GATE>; - clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; - assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, - <&clk IMX93_CLK_ENET>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, - <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; - assigned-clock-rates = <100000000>, <250000000>; - intf_mode = <&wakeupmix_gpr 0x28>; - snps,clk-csr = <0>; - status = "disabled"; - }; - - fec: ethernet@42890000 { - compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; - reg = <0x42890000 0x10000>; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_ENET1_GATE>, - <&clk IMX93_CLK_ENET1_GATE>, - <&clk IMX93_CLK_ENET_TIMER1>, - <&clk IMX93_CLK_ENET_REF>, - <&clk IMX93_CLK_ENET_REF_PHY>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>, - <&clk IMX93_CLK_ENET_REF>, - <&clk IMX93_CLK_ENET_REF_PHY>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, - <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>, - <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; - assigned-clock-rates = <100000000>, <250000000>, <50000000>; - fsl,num-tx-queues = <3>; - fsl,num-rx-queues = <3>; - status = "disabled"; - }; - - usdhc3: mmc@428b0000 { - compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; - reg = <0x428b0000 0x10000>; - interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_BUS_WAKEUP>, - <&clk IMX93_CLK_WAKEUP_AXI>, - <&clk IMX93_CLK_USDHC3_GATE>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; - status = "disabled"; - }; - }; - - gpio2: gpio@43810080 { - compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; - reg = <0x43810080 0x1000>, <0x43810040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&clk IMX93_CLK_GPIO2_GATE>, - <&clk IMX93_CLK_GPIO2_GATE>; - clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc 0 4 30>; - }; - - gpio3: gpio@43820080 { - compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; - reg = <0x43820080 0x1000>, <0x43820040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&clk IMX93_CLK_GPIO3_GATE>, - <&clk IMX93_CLK_GPIO3_GATE>; - clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>, - <&iomuxc 26 34 2>, <&iomuxc 28 0 4>; - }; - - gpio4: gpio@43830080 { - compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; - reg = <0x43830080 0x1000>, <0x43830040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&clk IMX93_CLK_GPIO4_GATE>, - <&clk IMX93_CLK_GPIO4_GATE>; - clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>; - }; - - gpio1: gpio@47400080 { - compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; - reg = <0x47400080 0x1000>, <0x47400040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&clk IMX93_CLK_GPIO1_GATE>, - <&clk IMX93_CLK_GPIO1_GATE>; - clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc 0 92 16>; - }; - - s4muap: mailbox@47520000 { - compatible = "fsl,imx93-mu-s4"; - reg = <0x47520000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - #mbox-cells = <2>; - }; - - media_blk_ctrl: system-controller@4ac10000 { - compatible = "fsl,imx93-media-blk-ctrl", "syscon"; - reg = <0x4ac10000 0x10000>; - power-domains = <&mediamix>; - clocks = <&clk IMX93_CLK_MEDIA_APB>, - <&clk IMX93_CLK_MEDIA_AXI>, - <&clk IMX93_CLK_NIC_MEDIA_GATE>, - <&clk IMX93_CLK_MEDIA_DISP_PIX>, - <&clk IMX93_CLK_CAM_PIX>, - <&clk IMX93_CLK_PXP_GATE>, - <&clk IMX93_CLK_LCDIF_GATE>, - <&clk IMX93_CLK_ISI_GATE>, - <&clk IMX93_CLK_MIPI_CSI_GATE>, - <&clk IMX93_CLK_MIPI_DSI_GATE>; - clock-names = "apb", "axi", "nic", "disp", "cam", - "pxp", "lcdif", "isi", "csi", "dsi"; - #power-domain-cells = <1>; - status = "disabled"; - }; - - usbotg1: usb@4c100000 { - compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x4c100000 0x200>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>, - <&clk IMX93_CLK_HSIO_32K_GATE>; - clock-names = "usb_ctrl_root_clk", "usb_wakeup"; - assigned-clocks = <&clk IMX93_CLK_HSIO>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; - assigned-clock-rates = <133000000>; - phys = <&usbphynop1>; - fsl,usbmisc = <&usbmisc1 0>; - status = "disabled"; - }; - - usbmisc1: usbmisc@4c100200 { - compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc", - "fsl,imx6q-usbmisc"; - reg = <0x4c100200 0x200>; - #index-cells = <1>; - }; - - usbotg2: usb@4c200000 { - compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x4c200000 0x200>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>, - <&clk IMX93_CLK_HSIO_32K_GATE>; - clock-names = "usb_ctrl_root_clk", "usb_wakeup"; - assigned-clocks = <&clk IMX93_CLK_HSIO>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; - assigned-clock-rates = <133000000>; - phys = <&usbphynop2>; - fsl,usbmisc = <&usbmisc2 0>; - status = "disabled"; - }; - - usbmisc2: usbmisc@4c200200 { - compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc", - "fsl,imx6q-usbmisc"; - reg = <0x4c200200 0x200>; - #index-cells = <1>; - }; - }; -}; diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig index 92cc688cbc7..7fa6d6369e8 100644 --- a/arch/arm/mach-imx/imx9/Kconfig +++ b/arch/arm/mach-imx/imx9/Kconfig @@ -121,6 +121,7 @@ config TARGET_IMX93_VAR_SOM bool "imx93_var_som" select IMX93 select IMX9_LPDDR4X + imply OF_UPSTREAM config TARGET_KONTRON_MX93 bool "Kontron OSM-S/BL i.MX93" diff --git a/configs/imx93_var_som_defconfig b/configs/imx93_var_som_defconfig index da5d473a7d9..26b0623ccdf 100644 --- a/configs/imx93_var_som_defconfig +++ b/configs/imx93_var_som_defconfig @@ -10,7 +10,7 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x700000 CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg" CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx93-var-som-symphony" +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx93-var-som-symphony" CONFIG_AHAB_BOOT=y CONFIG_TARGET_IMX93_VAR_SOM=y CONFIG_OF_LIBFDT_OVERLAY=y -- 2.34.1
