Change all uses of tristate in the PHY Kconfigs to bool. U-Boot does not support modules, so tristate does not make sense here.
Signed-off-by: David Lechner <[email protected]> --- drivers/phy/Kconfig | 14 +++++++------- drivers/phy/cadence/Kconfig | 4 ++-- drivers/phy/qcom/Kconfig | 16 ++++++++-------- drivers/phy/renesas/Kconfig | 6 +++--- drivers/phy/rockchip/Kconfig | 2 +- drivers/phy/ti/Kconfig | 2 +- 6 files changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 5c8ec2b146f..eafa82fe494 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -114,7 +114,7 @@ config BCM_SR_PCIE_PHY If unsure, say N. config PHY_DA8XX_USB - tristate "TI DA8xx USB PHY Driver" + bool "TI DA8xx USB PHY Driver" depends on PHY && ARCH_DAVINCI help Enable this to support the USB PHY on DA8xx SoCs. @@ -138,7 +138,7 @@ config SPL_PIPE3_PHY and omap5 config AM654_PHY - tristate "TI AM654 SERDES support" + bool "TI AM654 SERDES support" depends on PHY && ARCH_K3 select REGMAP select SYSCON @@ -155,7 +155,7 @@ config STI_USB_PHY STiH407 SoC families. config PHY_RCAR_GEN2 - tristate "Renesas R-Car Gen2 USB PHY" + bool "Renesas R-Car Gen2 USB PHY" depends on PHY && RCAR_GEN2 help Support for the Renesas R-Car Gen2 USB PHY. This driver operates the @@ -163,7 +163,7 @@ config PHY_RCAR_GEN2 allows configuring the module multiplexing. config PHY_RCAR_GEN3 - tristate "Renesas R-Car Gen3 USB PHY" + bool "Renesas R-Car Gen3 USB PHY" depends on PHY && CLK && DM_REGULATOR && (RCAR_GEN3 || RZG2L) default y if (RCAR_GEN3 || RZG2L) help @@ -171,7 +171,7 @@ config PHY_RCAR_GEN3 PHY connected to EHCI USB module and controls USB OTG operation. config PHY_STM32_USBPHYC - tristate "STMicroelectronics STM32 SoC USB HS PHY driver" + bool "STMicroelectronics STM32 SoC USB HS PHY driver" depends on PHY && ARCH_STM32MP help Enable this to support the High-Speed USB transceiver that is part of @@ -283,7 +283,7 @@ config PHY_MTK_TPHY so you can easily distinguish them by banks layout. config PHY_MTK_UFS - tristate "MediaTek UFS M-PHY driver" + bool "MediaTek UFS M-PHY driver" depends on ARCH_MEDIATEK depends on PHY help @@ -337,7 +337,7 @@ config PHY_IMX8M_PCIE This PHY is found on i.MX8M devices supporting PCIe. config PHY_XILINX_ZYNQMP - tristate "Xilinx ZynqMP PHY driver" + bool "Xilinx ZynqMP PHY driver" depends on PHY && ARCH_ZYNQMP help Enable this to support ZynqMP High Speed Gigabit Transceiver diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig index 8c0ab80fbbc..f5f096889fe 100644 --- a/drivers/phy/cadence/Kconfig +++ b/drivers/phy/cadence/Kconfig @@ -1,11 +1,11 @@ config PHY_CADENCE_SIERRA - tristate "Cadence Sierra PHY Driver" + bool "Cadence Sierra PHY Driver" depends on DM_RESET help Enable this to support the Cadence Sierra PHY driver config PHY_CADENCE_TORRENT - tristate "Cadence Torrent PHY Driver" + bool "Cadence Torrent PHY Driver" depends on DM_RESET help Enable this to support the Cadence Torrent PHY driver diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig index 49f830abf01..7094903d869 100644 --- a/drivers/phy/qcom/Kconfig +++ b/drivers/phy/qcom/Kconfig @@ -7,7 +7,7 @@ config MSM8916_USB_PHY This PHY is found on qualcomm dragonboard410c development board. config PHY_QCOM_IPQ4019_USB - tristate "Qualcomm IPQ4019 USB PHY driver" + bool "Qualcomm IPQ4019 USB PHY driver" depends on PHY && ARCH_IPQ40XX help Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. @@ -21,26 +21,26 @@ config PHY_QCOM_QMP_COMBO PHY (USB3 + DisplayPort). Currently only USB3 mode is supported. config PHY_QCOM_QMP_PCIE - tristate "Qualcomm QMP PCIe PHY driver" + bool "Qualcomm QMP PCIe PHY driver" depends on PHY && ARCH_SNAPDRAGON help Enable this to support the PCIe QMP PHY on various Qualcomm chipsets. config PHY_QCOM_QMP_UFS - tristate "Qualcomm QMP UFS PHY driver" + bool "Qualcomm QMP UFS PHY driver" depends on PHY && ARCH_SNAPDRAGON help Enable this to support the UFS QMP PHY on various Qualcomm chipsets. config PHY_QCOM_QUSB2 - tristate "Qualcomm USB QUSB2 PHY driver" + bool "Qualcomm USB QUSB2 PHY driver" depends on PHY && ARCH_SNAPDRAGON help Enable this to support the Super-Speed USB transceiver on various Qualcomm chipsets. config PHY_QCOM_USB_SNPS_FEMTO_V2 - tristate "Qualcomm SNPS FEMTO USB HS PHY v2" + bool "Qualcomm SNPS FEMTO USB HS PHY v2" depends on PHY && ARCH_SNAPDRAGON help Enable this to support the Qualcomm Synopsys DesignWare Core 7nm @@ -48,7 +48,7 @@ config PHY_QCOM_USB_SNPS_FEMTO_V2 is usually paired with Synopsys DWC3 USB IPs on MSM SOCs. config PHY_QCOM_SNPS_EUSB2 - tristate "Qualcomm Synopsys eUSB2 High-Speed PHY" + bool "Qualcomm Synopsys eUSB2 High-Speed PHY" depends on PHY && ARCH_SNAPDRAGON help Enable this to support the Qualcomm Synopsys DesignWare eUSB2 @@ -56,7 +56,7 @@ config PHY_QCOM_SNPS_EUSB2 is usually paired with Synopsys DWC3 USB IPs on MSM SOCs. config PHY_QCOM_USB_HS_28NM - tristate "Qualcomm 28nm High-Speed PHY" + bool "Qualcomm 28nm High-Speed PHY" depends on PHY && ARCH_SNAPDRAGON help Enable this to support the Qualcomm Synopsys DesignWare Core 28nm @@ -65,7 +65,7 @@ config PHY_QCOM_USB_HS_28NM IPs on MSM SOCs. config PHY_QCOM_USB_SS - tristate "Qualcomm USB Super-Speed PHY driver" + bool "Qualcomm USB Super-Speed PHY driver" depends on PHY && ARCH_SNAPDRAGON help Enable this to support the Super-Speed USB transceiver on various diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig index affbee0500c..3358d454e59 100644 --- a/drivers/phy/renesas/Kconfig +++ b/drivers/phy/renesas/Kconfig @@ -3,19 +3,19 @@ # Phy drivers for Renesas platforms config PHY_R8A779F0_ETHERNET_SERDES - tristate "Renesas R-Car S4-8 Ethernet SERDES driver" + bool "Renesas R-Car S4-8 Ethernet SERDES driver" depends on RCAR_64 && PHY help Support for Ethernet SERDES found on Renesas R-Car S4-8 SoCs. config PHY_R8A78000_ETHERNET_PCS - tristate "Renesas R-Car X5H Ethernet PCS driver" + bool "Renesas R-Car X5H Ethernet PCS driver" depends on RCAR_64 && PHY help Support for Ethernet PCS found on Renesas R-Car X5H SoCs. config PHY_R8A78000_MP_PHY - tristate "Renesas R-Car X5H Multi-Protocol PHY driver" + bool "Renesas R-Car X5H Multi-Protocol PHY driver" depends on RCAR_64 && PHY help Support for Multi-Protocol PHY on Renesas R-Car X5H SoCs. diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index 80128335d52..6f3d7ebe29e 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -49,7 +49,7 @@ config PHY_ROCKCHIP_SNPS_PCIE3 also be able splited into multiple combinations of lanes. config PHY_ROCKCHIP_USBDP - tristate "Rockchip USBDP COMBO PHY Driver" + bool "Rockchip USBDP COMBO PHY Driver" depends on ARCH_ROCKCHIP select PHY help diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig index df750b26d66..fe96eb6806f 100644 --- a/drivers/phy/ti/Kconfig +++ b/drivers/phy/ti/Kconfig @@ -1,5 +1,5 @@ config PHY_J721E_WIZ - tristate "TI J721E WIZ (SERDES Wrapper) support" + bool "TI J721E WIZ (SERDES Wrapper) support" depends on ARCH_K3 help This option enables support for WIZ module present in TI's J721E --- base-commit: e3e651c480c46b332f16a7555b97c6c6fd640a40 change-id: 20260513-phy-kconfig-no-tristate-61bc2d324149 Best regards, -- David Lechner <[email protected]>
