From: Antoine Bernard <[email protected]> Add properties in the DTSI file which is required for S-BOOT when used an external device tree when booting into U-Boot. S-BOOT is Samsung's proprietary bootloader, which chainloads U-Boot.
Add a framebuffer node to the DTSI in order to ensure that display continues to work. Signed-off-by: Antoine Bernard <[email protected]> Signed-off-by: Kaustabh Chakraborty <[email protected]> --- arch/arm/dts/exynos7870-j7xelte-u-boot.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/dts/exynos7870-j7xelte-u-boot.dtsi b/arch/arm/dts/exynos7870-j7xelte-u-boot.dtsi new file mode 100644 index 00000000000..bef9424b1b6 --- /dev/null +++ b/arch/arm/dts/exynos7870-j7xelte-u-boot.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2026 Antoine Bernard <[email protected]> + */ + +/ { + /* These properties are required by S-BOOT. */ + model_info-chip = <7870>; + model_info-hw_rev = <0>; + model_info-hw_rev_end = <255>; + + chosen { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + framebuffer@67000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x67000000 (720 * 1280 * 4)>; + width = <720>; + height = <1280>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; +}; --- base-commit: 6cdd7597a2fbfc1572c1b0af23d3daf1cefa2de7 change-id: 20260513-j7xelte-dtsi-0cd377c618a6 Best regards, -- Kaustabh Chakraborty <[email protected]>
