This series performs a general cleanup of the default U-boot environment for sc5xx boards, stemming from the decision to no longer store the environment in the SPI flash. The environments for each board have been edited to contain the minimum number of commands needed for all supported boot modes to avoid confusion, and the default boot command synced to spi for all boards that support it. The filesystem for the SPI flash has also been changed from jffs2 to ubifs.
A bug with the Ethernet reset line on the sc594 has been fixed, and the sc573 has been renamed from the EZKIT to the EZLITE to match the name of the publically available board. EZKIT was only used internally before release. Preliminary binman support for sc5xx boards has been removed as it was unused and full support never added. Signed-off-by: Caleb Ethridge <[email protected]> Changes in v6: - Fixed ramdisk_addr_r for the sc584-ezkit - Updated commit messages with more information - Split "Remove update commands" into two logical commits Note: The series and future patch series will be sent using analog.com email addresses, instead of personal emails with our analog.com emails cc'ed on the series. Caleb Ethridge (15): configs: sc5xx: Do not store environment in SPI flash mach-sc5xx: Remove update commands from default environment mach-sc59x: Add CONFIG_SC5XX_LOADADDR mach-sc5xx: Update boot commands mach-sc5xx: Switch from tftp to wget mach-sc5xx: Add USB boot command mach-sc5xx: Remove preliminary binman support dts: sc594: Fix gige-reset line on EZKIT mach-sc5xx: sc573: Rename EZKIT board to EZLITE mach-sc5xx: Update image load address mach-sc5xx: Update SPI bootargs for ubifs configs: sc5xx: Set default bootcmd to SPI boot arm: sc5xx: Remove SC5XX_LOADADDR arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and ramdisk_addr_r mach-sc5xx: Remove unused image offset Kconfig options Ozan Durgut (1): arm: sc5xx: add missing boot env selectors arch/arm/dts/Makefile | 2 +- .../dts/{sc573-ezkit.dts => sc573-ezlite.dts} | 4 +- arch/arm/dts/sc594-som-ezkit.dts | 2 +- arch/arm/dts/sc5xx.dtsi | 41 ------- arch/arm/mach-sc5xx/Kconfig | 71 +----------- arch/arm/mach-sc5xx/init/dmcinit.c | 2 +- board/adi/sc573-ezkit/sc573-ezkit.env | 17 --- .../adi/{sc573-ezkit => sc573-ezlite}/Kconfig | 8 +- .../{sc573-ezkit => sc573-ezlite}/Makefile | 2 +- .../sc573-ezlite.c} | 0 board/adi/sc573-ezlite/sc573-ezlite.env | 16 +++ board/adi/sc584-ezkit/sc584-ezkit.env | 9 +- board/adi/sc589-ezkit/sc589-ezkit.env | 9 +- board/adi/sc589-mini/sc589-mini.env | 9 +- board/adi/sc594-som-ezkit/sc594-som-ezkit.env | 9 +- .../adi/sc594-som-ezlite/sc594-som-ezlite.env | 9 +- board/adi/sc598-som-ezkit/sc598-som-ezkit.env | 9 +- .../adi/sc598-som-ezlite/sc598-som-ezlite.env | 14 ++- ...ezkit_defconfig => sc573-ezlite_defconfig} | 11 +- configs/sc584-ezkit_defconfig | 10 +- configs/sc589-ezkit_defconfig | 12 +- configs/sc589-mini_defconfig | 12 +- configs/sc594-som-ezkit-spl_defconfig | 7 +- configs/sc594-som-ezlite-spl_defconfig | 7 +- configs/sc598-som-ezkit-spl_defconfig | 5 +- configs/sc598-som-ezlite-spl_defconfig | 5 +- .../arm/adi/adi,sc5xx.yaml | 2 +- .../configs/{sc573-ezkit.h => sc573-ezlite.h} | 4 +- include/env/adi/adi_boot.env | 103 +++++------------- 29 files changed, 108 insertions(+), 303 deletions(-) rename arch/arm/dts/{sc573-ezkit.dts => sc573-ezlite.dts} (98%) delete mode 100644 board/adi/sc573-ezkit/sc573-ezkit.env rename board/adi/{sc573-ezkit => sc573-ezlite}/Kconfig (92%) rename board/adi/{sc573-ezkit => sc573-ezlite}/Makefile (79%) rename board/adi/{sc573-ezkit/sc573-ezkit.c => sc573-ezlite/sc573-ezlite.c} (100%) create mode 100644 board/adi/sc573-ezlite/sc573-ezlite.env rename configs/{sc573-ezkit_defconfig => sc573-ezlite_defconfig} (87%) rename include/configs/{sc573-ezkit.h => sc573-ezlite.h} (79%) -- 2.34.1
