Add default configuration for the IPQ9650 RDP488 board with eMMC boot support.
Signed-off-by: Badhrinath S <[email protected]> --- configs/qcom_ipq9650_mmc_defconfig | 57 ++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 configs/qcom_ipq9650_mmc_defconfig diff --git a/configs/qcom_ipq9650_mmc_defconfig b/configs/qcom_ipq9650_mmc_defconfig new file mode 100644 index 000000000000..ce2488d72eb1 --- /dev/null +++ b/configs/qcom_ipq9650_mmc_defconfig @@ -0,0 +1,57 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_SYS_INIT_SP_BSS_OFFSET=0x180000 +CONFIG_ARCH_SNAPDRAGON=y +CONFIG_TEXT_BASE=0x8a280000 +CONFIG_NR_DRAM_BANKS=24 +CONFIG_ENV_SIZE=0x40000 +CONFIG_ENV_OFFSET=0 +CONFIG_DEFAULT_DEVICE_TREE="qcom/ipq9650-rdp488" +CONFIG_SYS_LOAD_ADDR=0x90000000 +CONFIG_DEBUG_UART_BASE=0x1a98000 +CONFIG_DEBUG_UART_CLOCK=14745600 +CONFIG_DEBUG_UART=y +CONFIG_REMAKE_ELF=y +# CONFIG_EFI_LOADER is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +# CONFIG_BOOTSTD is not set +CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_PREBOOT=y +CONFIG_SYS_PBSIZE=1024 +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_OF_LIVE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_CLK=y +CONFIG_CLK_QCOM_IPQ9650=y +CONFIG_MSM_GPIO=y +# CONFIG_I2C is not set +# CONFIG_INPUT is not set +CONFIG_MISC=y +CONFIG_QCOM_GENI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ADMA=y +CONFIG_MMC_SDHCI_MSM=y +CONFIG_MTD=y +CONFIG_DM_MDIO=y +CONFIG_DM_ETH_PHY=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_QCOM=y +CONFIG_RGMII=y +CONFIG_PHY=y +CONFIG_PHY_QCOM_QMP_UFS=y +CONFIG_PHY_QCOM_QUSB2=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_QCOM_IPQ9650=y +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_MSM_SERIAL=y +CONFIG_MSM_GENI_SERIAL=y +CONFIG_SOC_QCOM=y +CONFIG_SYS_MALLOC_LEN=0xC0000 -- 2.34.1
