Enable environment variable support on the eMMC storage device for both SPL and U-Boot stages.
Signed-off-by: Eric Chung <[email protected]> --- configs/spacemit_k1_defconfig | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/configs/spacemit_k1_defconfig b/configs/spacemit_k1_defconfig index 886679367a9..1c92c4082a7 100644 --- a/configs/spacemit_k1_defconfig +++ b/configs/spacemit_k1_defconfig @@ -14,7 +14,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0xc00000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x100000 +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x400000 CONFIG_SYS_BOOTM_LEN=0xa000000 CONFIG_SYS_LOAD_ADDR=0x200000 CONFIG_SPL_SIZE_LIMIT=0x31000 @@ -48,6 +48,10 @@ CONFIG_CMD_TLV_EEPROM=y CONFIG_SPL_CMD_TLV_EEPROM=y CONFIG_OF_UPSTREAM=y CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_SIZE=0x4000 +CONFIG_ENV_OFFSET=0x60000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_ENV_IS_IN_MMC=y CONFIG_SPL_REGMAP=y CONFIG_SYSCON=y CONFIG_SPL_SYSCON=y @@ -111,5 +115,6 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_SPI_FLASH_TINY=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MMC=y CONFIG_SPL_SYS_MMCSD_RAW_MODE=y -- 2.51.0
