This series picks USB related DT commits from v7.2-rc1-dts to enabled USB support on existing RK3528 boards. It also adds required DT nodes and enables required Kconfig options on the Generic RK3528 target.
The 'Add watchdog node for RK3528' commit was included to fully sync RK3528 DTs up to v7.2-rc1 state, it is not required for USB support. USB has been verified working on following boards using both generic and the board specific defconfig target. - ArmSoM Sige1 - FriendlyElec NanoPi Zero2 - Radxa E20C - Radxa ROCK 2F Please note that the dts/upstream related patches should be applied after v7.1-dts has been fully pulled into dts/upstream. Jonas Karlman (7): arm64: dts: rockchip: Add watchdog node for RK3528 arm64: dts: rockchip: Add USB nodes for RK3528 arm64: dts: rockchip: Enable USB 2.0 ports on Radxa E20C arm64: dts: rockchip: Enable USB ports on Radxa ROCK 2A/2F arm64: dts: rockchip: Enable USB 2.0 ports on ArmSoM Sige1 arm64: dts: rockchip: Enable USB 2.0 ports on NanoPi Zero2 rockchip: rk3528-generic: Add support for USB OTG arch/arm/dts/rk3528-generic.dts | 18 +++- configs/generic-rk3528_defconfig | 10 +++ .../arm64/rockchip/rk3528-armsom-sige1.dts | 25 ++++++ .../arm64/rockchip/rk3528-nanopi-zero2.dts | 29 ++++++ .../src/arm64/rockchip/rk3528-radxa-e20c.dts | 60 +++++++++++++ .../src/arm64/rockchip/rk3528-rock-2.dtsi | 17 ++++ .../src/arm64/rockchip/rk3528-rock-2a.dts | 11 +++ .../src/arm64/rockchip/rk3528-rock-2f.dts | 12 +++ dts/upstream/src/arm64/rockchip/rk3528.dtsi | 88 +++++++++++++++++++ 9 files changed, 269 insertions(+), 1 deletion(-) -- 2.54.0
