Rockchip RK3528 has one USB 3.0 DWC3 controller and oneUSB 2.0 EHCI/OHCI controller and uses an Innosilicon-USB2PHY for USB 2.0. The DWC3 controller additionally uses the Naneng Combo PHY for USB3.
Add device tree nodes to describe these USB controllers along with the USB 2.0 PHYs. [moved snps,dis_u2_susphy_quirk here from individual boards, describe both usb2+3 default phy connections, usb2 boards can override] Signed-off-by: Jonas Karlman <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patch.msgid.link/[email protected] [ upstream commit: 5f3ae9b12a6c523992a7216bbc4420ac33450b79 ] (cherry picked from commit 7793aab344678ac6b9fe039d01ff0c1106bc8b0d) Signed-off-by: Jonas Karlman <[email protected]> --- dts/upstream/src/arm64/rockchip/rk3528.dtsi | 80 +++++++++++++++++++++ 1 file changed, 80 insertions(+) diff --git a/dts/upstream/src/arm64/rockchip/rk3528.dtsi b/dts/upstream/src/arm64/rockchip/rk3528.dtsi index 77d314716b43..03cd00f88dbb 100644 --- a/dts/upstream/src/arm64/rockchip/rk3528.dtsi +++ b/dts/upstream/src/arm64/rockchip/rk3528.dtsi @@ -336,6 +336,33 @@ }; }; + usb_host0_xhci: usb@fe500000 { + compatible = "rockchip,rk3528-dwc3", "snps,dwc3"; + reg = <0x0 0xfe500000 0x0 0x400000>; + clocks = <&cru CLK_REF_USB3OTG>, + <&cru CLK_SUSPEND_USB3OTG>, + <&cru ACLK_USB3OTG>; + clock-names = "ref_clk", "suspend_clk", "bus_clk"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&power RK3528_PD_VPU>; + resets = <&cru SRST_A_USB3OTG>; + dr_mode = "otg"; + phys = <&usb2phy_otg>, <&combphy PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis_rxdet_inp3_quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,parkmode-disable-hs-quirk; + snps,parkmode-disable-ss-quirk; + status = "disabled"; + }; + gic: interrupt-controller@fed01000 { compatible = "arm,gic-400"; reg = <0x0 0xfed01000 0 0x1000>, @@ -349,6 +376,30 @@ #interrupt-cells = <3>; }; + usb_host0_ehci: usb@ff100000 { + compatible = "generic-ehci"; + reg = <0x0 0xff100000 0x0 0x40000>; + clocks = <&cru HCLK_USBHOST>, <&cru HCLK_USBHOST_ARB>, + <&usb2phy>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2phy_host>; + phy-names = "usb"; + power-domains = <&power RK3528_PD_VO>; + status = "disabled"; + }; + + usb_host0_ohci: usb@ff140000 { + compatible = "generic-ohci"; + reg = <0x0 0xff140000 0x0 0x40000>; + clocks = <&cru HCLK_USBHOST>, <&cru HCLK_USBHOST_ARB>, + <&usb2phy>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2phy_host>; + phy-names = "usb"; + power-domains = <&power RK3528_PD_VO>; + status = "disabled"; + }; + qos_crypto_a: qos@ff200000 { compatible = "rockchip,rk3528-qos", "syscon"; reg = <0x0 0xff200000 0x0 0x20>; @@ -1281,6 +1332,35 @@ rockchip,pipe-phy-grf = <&pipe_phy_grf>; status = "disabled"; }; + + usb2phy: usb2phy@ffdf0000 { + compatible = "rockchip,rk3528-usb2phy"; + reg = <0x0 0xffdf0000 0x0 0x10000>; + clocks = <&cru CLK_REF_USBPHY>, <&cru PCLK_USBPHY>; + clock-names = "phyclk", "pclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy_480m"; + power-domains = <&power RK3528_PD_VO>; + rockchip,usbgrf = <&vo_grf>; + status = "disabled"; + + usb2phy_otg: otg-port { + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2phy_host: host-port { + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; }; }; -- 2.54.0
