The TC58NVG1S3H is not ONFI-compliant and shares its first two ID bytes with the generic 256 MiB NAND entry. Add a full-ID entry with the geometry, ECC requirement and default SDR mode 4 specified by the datasheet.
Signed-off-by: James Hilliard <[email protected]> --- drivers/mtd/nand/raw/nand_ids.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c index 4f46378ffe1..966972beca2 100644 --- a/drivers/mtd/nand/raw/nand_ids.c +++ b/drivers/mtd/nand/raw/nand_ids.c @@ -32,6 +32,10 @@ struct nand_flash_dev nand_flash_ids[] = { { .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} }, SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), 2 }, + {"TC58NVG1S3H 2G 3.3V 8-bit", + { .id = {0x98, 0xda, 0x90, 0x15, 0x76} }, + SZ_2K, SZ_256, SZ_128K, 0, 5, 128, NAND_ECC_INFO(8, SZ_512), + 4 }, {"TC58NVG2S0F 4G 3.3V 8-bit", { .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} }, SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) }, -- 2.53.0
