On Thu, Sep 1, 2011 at 12:45 AM, Wolfgang Denk <w...@denx.de> wrote: > Dear "elison.ni...@gmail.com", > > In message > <CAAO=tycsjghwduvyrh5zechm6l6f4kpec8qyu8_pzzacibn...@mail.gmail.com> you > wrote: >> >> How am I supposed to set the real MAC in the environment? Build >> separate images for each board? I do not want that. > > Not that is finally a good question, and one where answering makes > sense again. > > There are many ways, depending on how you organized the production > and/or testing of your boards. > > Of course, you can also pre-program your flashes before even fitting > the chips on the boards. There are programmers that support auto- > incrementing serial numbers or automatic insertion of data blocks > retrieved from some sort of production database.
Yes, this is what I am looking into. Seems the most fitting in my case. > There is a zillion of methods to do what you want, you just have to > pick one that fits your board and your productions and test > environment best. And any of these is way better than using random > MAC addresses. > Thanks a lot ! Thanks, Elison _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
