Hi, -----Original Message----- From: Stefano Babic [mailto:[email protected]]
Take into account that the u-boot.bin in the last release must be stored on the NOR flash of your board - the board has both NAND and NOR flash. The DIP switch on the main board and on the Debug extension must be set to boot from the NOR flash. Yes, I just realized that it might be the cause. I our hw doesn't have NOR, only NAND. I looked in mx35pdk.h config-header, but couldn't find place where to config U-boot for NAND. I'm compiling U-boot myself and not using precompiled binary. -Teemu _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
