Hi, From: [email protected] [mailto:[email protected]] On Behalf Of Stefano Babic
> Well, the mx35pdk (aka mx35_3stack) has always NOR flash, so far as I know. > Do you mean you are running a custom board ? Yes, I'm running custom board. > There is no such a simple CONFIG_ to switch them and you must add support for > it. > To boot with NAND, you have to use the SPL mechanism. This set up the RAM and > copies the u-boot image from NAND to RAM. NAND driver for the > MX35 is supported, so it should be not a big effort to add the board. I'm currently running U-boot from Freescale that runs as is in dev-board as well and it boots from NAND. That's why I thought that newer U-boot would also, but I guess I was mistaken. I'll have to take a look how to get U-boot to boot from NAND instead of NOR unless someone else has already made this patch? I don't think I'm first one with this problem? - Teemu _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
