As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c
Signed-off-by: Fabio Estevam <[email protected]> --- board/logicpd/imx31_litekit/imx31_litekit.c | 6 ------ include/configs/imx31_litekit.h | 2 +- 2 files changed, 1 insertions(+), 7 deletions(-) diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c index 09cc9c5..0402a0b 100644 --- a/board/logicpd/imx31_litekit/imx31_litekit.c +++ b/board/logicpd/imx31_litekit/imx31_litekit.c @@ -37,12 +37,6 @@ int dram_init(void) return 0; } -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - int board_early_init_f(void) { __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index b7f1cb3..2a02b3d 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -150,7 +150,7 @@ #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SYS_SDRAM_BASE CSD0_BASE +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -- 1.6.0.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
