Marek Vasut wrote:
Marek Vasut wrote:
Marek Vasut wrote:
Hi Marek,
u-boot-v2011.09 doesn't support for imx28. I need complete support
patch for mx28. where can i get those patches?
for which version of u-boot this patches supports..?
Regards,
Manoj
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
M
Thanks Marek,
Patches applied..
on usb start command i'm getting "scanning bus for devices... New Device
0" then its freezes after getting the debug message
"enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1
length 0x0"
can u help me on this further?
Regards,
Manoj
There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c
on xscale" in uboot ML ... apply the patch and retry. What GCC do you
use?
M
Hello Marek,
I'm using
u-boot version : u-boot-imx
gcc version:4.3.3
When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c
on xscale"
I'm getting:
patching file usb.c
Hunk #1 FAILED at 263.
Hunk #2 FAILED at 313.
2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej
then i made some changes for common/usb.c as per the patch,even it gets
freezes after printing the debug msg.
"enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1
length 0x0"
Regards,
Manoj
Are you using top-of-the-tree u-boot-imx/master? You shouldn't need to apply any
patches. That'd explain why you're getting errors applying the last USB patch I
suggested.
Also, please try ELDK5.0 toolchain.
M
Marek,
ya i'm using master code and now its working fine..
Regards,
Manoj
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
