> Marek Vasut wrote: > >> Marek Vasut wrote: > >>>> Marek Vasut wrote: > >>>>>> Hi Marek, > >>>>>> > >>>>>> u-boot-v2011.09 doesn't support for imx28. I need complete support > >>>>>> patch for mx28. where can i get those patches? > >>>>>> > >>>>>> for which version of u-boot this patches supports..? > >>>>>> > >>>>>> > >>>>>> Regards, > >>>>>> Manoj > >>>>> > >>>>> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary > >>>>> > >>>>> M > >>>> > >>>> Thanks Marek, > >>>> Patches applied.. > >>>> on usb start command i'm getting "scanning bus for devices... New > >>>> Device 0" then its freezes after getting the debug message > >>>> "enabling power on all ports > >>>> usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 > >>>> length 0x0" > >>>> can u help me on this further? > >>>> > >>>> Regards, > >>>> Manoj > >>> > >>> There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c > >>> on xscale" in uboot ML ... apply the patch and retry. What GCC do you > >>> use? > >>> > >>> M > >> > >> Hello Marek, > >> > >> I'm using > >> u-boot version : u-boot-imx > >> > >> gcc version:4.3.3 > >> > >> When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c > >> on xscale" > >> I'm getting: > >> patching file usb.c > >> Hunk #1 FAILED at 263. > >> Hunk #2 FAILED at 313. > >> 2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej > >> > >> then i made some changes for common/usb.c as per the patch,even it gets > >> freezes after printing the debug msg. > >> "enabling power on all ports > >> usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 > >> length 0x0" > >> > >> Regards, > >> Manoj > > > > Are you using top-of-the-tree u-boot-imx/master? You shouldn't need to > > apply any patches. That'd explain why you're getting errors applying the > > last USB patch I suggested. > > > > Also, please try ELDK5.0 toolchain. > > > > M > > Marek, > > ya i'm using master code and now its working fine..
Is it because of "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" or ELDK5.0 or Using u-boot/master ? What did you change? Anyway, it's good to hear!! M _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
