[U-Boot] [PATCH v3 2/7] board/overo/overo.c: replace printf with one argument by puts

[Andreas Müller]

Signed-off-by: Andreas Müller <schnitzelt...@gmx.de>
---
 board/overo/overo.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/board/overo/overo.c b/board/overo/overo.c
index 3c60b06..4a20c7f 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -119,7 +119,7 @@ int get_board_revision(void)
                           gpio_get_value(113) << 1 |
                           gpio_get_value(112);
        } else {
-               printf("Error: unable to acquire board revision GPIOs\n");
+               puts("Error: unable to acquire board revision GPIOs\n");
                revision = -1;
        }
 
@@ -151,7 +151,7 @@ int get_sdio2_config(void)
 
                gpio_direction_input(130);
        } else {
-               printf("Error: unable to acquire sdio2 clk GPIOs\n");
+               puts("Error: unable to acquire sdio2 clk GPIOs\n");
                sdio_direct = -1;
        }
 
@@ -200,15 +200,15 @@ int misc_init_r(void)
 
        switch (get_sdio2_config()) {
        case 0:
-               printf("Tranceiver detected on mmc2\n");
+               puts("Tranceiver detected on mmc2\n");
                MUX_OVERO_SDIO2_TRANSCEIVER();
                break;
        case 1:
-               printf("Direct connection on mmc2\n");
+               puts("Direct connection on mmc2\n");
                MUX_OVERO_SDIO2_DIRECT();
                break;
        default:
-               printf("Unable to detect mmc2 connection type\n");
+               puts("Unable to detect mmc2 connection type\n");
        }
 
        switch (get_expansion_id()) {
@@ -269,10 +269,10 @@ int misc_init_r(void)
                setenv("defaultdisplay", "dvi");
                break;
        case GUMSTIX_NO_EEPROM:
-               printf("No EEPROM on expansion board\n");
+               puts("No EEPROM on expansion board\n");
                break;
        default:
-               printf("Unrecognized expansion board\n");
+               puts("Unrecognized expansion board\n");
        }
 
        if (expansion_config.content == 1)
-- 
1.7.4.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot