On Wed, Jan 4, 2012 at 6:26 PM, Andreas Müller <schnitzelt...@gmx.de> wrote: > V1 -> V2 > * cleanups: replace printf with one argument by puts [1-2] > * cleanups: remove unused macros and macro values / tabbing / remove FSF > address [3] > * i2c: move all local variables to SRAM [4] > * OMAP SPL: call timer_init in s_init to make udelay work earlier [5] > * hint CONFIG_SYS_TEXT_BASE changed in commit message [6] > * remove log 'Texas Instruments Revision detection unimplemented' for overo > [6] > * remove unintended whitespaces [6] > * send 'shut up' to TWL4030 to avoid corruption when reading board revision > [6] > * use macros for overo revisions [6] > * don't separate SPL specific configurations [6] > > V2 -> V3 > * modify omap_rev_string [6] > * CONFIG_SYS_TEXT_BASE back to 0x80008000 [7] > * modify CONFIG_SYS_SPL_MALLOC_START / CONFIG_SYS_SPL_MALLOC_SIZE / > CONFIG_SPL_BSS_START_ADDR to avoid conflicts with CONFIG_SYS_TEXT_BASE [7] > > Andreas Müller (7): > drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts > board/overo/overo.c: replace printf with one argument by puts > include/configs/omap3_overo.h: several cleanups > drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM > OMAP SPL: call timer_init in s_init to make udelay work earlier > omap_rev_string: output to stdout > overo: add SPL support > > arch/arm/cpu/armv7/omap-common/hwinit-common.c | 10 +- > arch/arm/cpu/armv7/omap-common/spl.c | 12 +-- > arch/arm/cpu/armv7/omap3/board.c | 2 + > arch/arm/include/asm/arch-omap3/mem.h | 26 +++++ > arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +- > arch/arm/include/asm/arch-omap5/sys_proto.h | 2 +- > arch/arm/include/asm/omap_common.h | 2 +- > board/overo/config.mk | 28 ------ > board/overo/overo.c | 79 ++++++++++++++-- > board/overo/overo.h | 9 ++ > drivers/i2c/omap24xx_i2c.c | 25 +++-- > include/configs/omap3_overo.h | 121 > ++++++++++++++++-------- > 12 files changed, 217 insertions(+), 101 deletions(-) > delete mode 100644 board/overo/config.mk
With the changes posted in reply to 6/7, applied to u-boot-ti/master, thanks! -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot