From: Robert Delien <[email protected]> This patch replaces the use of magice numbers for scratch register addresses with earlier defined register definitions.
Signed-off-by: Robert Delien <[email protected]> --- arch/arm/cpu/arm926ejs/mx28/mx28.c | 8 ++++---- arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c index 0e69193..9bfd83b 100644 --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c @@ -261,14 +261,14 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) } #endif -#define HW_DIGCTRL_SCRATCH0 0x8001c280 -#define HW_DIGCTRL_SCRATCH1 0x8001c290 int mx28_dram_init(void) { + struct mx28_digctl_regs *digctl_regs = + (struct mx28_digctl_regs *)MXS_DIGCTL_BASE; uint32_t sz[2]; - sz[0] = readl(HW_DIGCTRL_SCRATCH0); - sz[1] = readl(HW_DIGCTRL_SCRATCH1); + sz[0] = readl(&digctl_regs->hw_digctl_scratch0); + sz[1] = readl(&digctl_regs->hw_digctl_scratch1); if (sz[0] != sz[1]) { printf("MX28:\n" diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c index cf4361c..30d8a60 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c @@ -159,8 +159,6 @@ void mx28_mem_setup_vddd(void) &power_regs->hw_power_vdddctrl); } -#define HW_DIGCTRL_SCRATCH0 0x8001c280 -#define HW_DIGCTRL_SCRATCH1 0x8001c290 void data_abort_memdetect_handler(void) __attribute__((naked)); void data_abort_memdetect_handler(void) { @@ -169,6 +167,8 @@ void data_abort_memdetect_handler(void) void mx28_mem_get_size(void) { + struct mx28_digctl_regs *digctl_regs = + (struct mx28_digctl_regs *)MXS_DIGCTL_BASE; uint32_t sz, da; uint32_t *vt = (uint32_t *)0x20; @@ -177,8 +177,8 @@ void mx28_mem_get_size(void) vt[4] = (uint32_t)&data_abort_memdetect_handler; sz = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - writel(sz, HW_DIGCTRL_SCRATCH0); - writel(sz, HW_DIGCTRL_SCRATCH1); + writel(sz, &digctl_regs->hw_digctl_scratch0); + writel(sz, &digctl_regs->hw_digctl_scratch1); /* Restore the old DABT handler. */ vt[4] = da; -- 1.7.0.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
