> From: Robert Delien <[email protected]> > > This patch replaces the use of magice numbers for scratch register > addresses with earlier defined register definitions. > > Signed-off-by: Robert Delien <[email protected]> > --- > arch/arm/cpu/arm926ejs/mx28/mx28.c | 8 ++++---- > arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 8 ++++---- > 2 files changed, 8 insertions(+), 8 deletions(-) > > diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c > b/arch/arm/cpu/arm926ejs/mx28/mx28.c index 0e69193..9bfd83b 100644 > --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c > +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c > @@ -261,14 +261,14 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char > *mac) } > #endif > > -#define HW_DIGCTRL_SCRATCH0 0x8001c280 > -#define HW_DIGCTRL_SCRATCH1 0x8001c290 > int mx28_dram_init(void) > { > + struct mx28_digctl_regs *digctl_regs = > + (struct mx28_digctl_regs *)MXS_DIGCTL_BASE; > uint32_t sz[2]; > > - sz[0] = readl(HW_DIGCTRL_SCRATCH0); > - sz[1] = readl(HW_DIGCTRL_SCRATCH1); > + sz[0] = readl(&digctl_regs->hw_digctl_scratch0); > + sz[1] = readl(&digctl_regs->hw_digctl_scratch1); > > if (sz[0] != sz[1]) { > printf("MX28:\n" > diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c > b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c index cf4361c..30d8a60 100644 > --- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c > +++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c > @@ -159,8 +159,6 @@ void mx28_mem_setup_vddd(void) > &power_regs->hw_power_vdddctrl); > } > > -#define HW_DIGCTRL_SCRATCH0 0x8001c280 > -#define HW_DIGCTRL_SCRATCH1 0x8001c290 > void data_abort_memdetect_handler(void) __attribute__((naked)); > void data_abort_memdetect_handler(void) > { > @@ -169,6 +167,8 @@ void data_abort_memdetect_handler(void) > > void mx28_mem_get_size(void) > { > + struct mx28_digctl_regs *digctl_regs = > + (struct mx28_digctl_regs *)MXS_DIGCTL_BASE; > uint32_t sz, da; > uint32_t *vt = (uint32_t *)0x20; > > @@ -177,8 +177,8 @@ void mx28_mem_get_size(void) > vt[4] = (uint32_t)&data_abort_memdetect_handler; > > sz = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); > - writel(sz, HW_DIGCTRL_SCRATCH0); > - writel(sz, HW_DIGCTRL_SCRATCH1); > + writel(sz, &digctl_regs->hw_digctl_scratch0); > + writel(sz, &digctl_regs->hw_digctl_scratch1); > > /* Restore the old DABT handler. */ > vt[4] = da;
This is good. M _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
