> Hi, > I'm struggling to find USB support in U-Boot for MX23EVK board. I'm > building u-boot source using LTIB(L2.6.31_10.05.02_ER_source.tar > downloaded from internet).
Please use ELDK, 5.1 is preffered as that's the latest version. LTIB is ancient crap. > I'm able to find USB driver(i.e., ehci-hcd.c > file) in U-Boot source 2009.08. Oh come on ... git clone git://git.denx.de/u-boot-imx.git > But usb_init function call is not made in > board_init function in the corresponding board specific file > (evk23_evk.c). Could you help me finding what could be done for enabling > USB support in u-boot to support for ARM based mx23evk board. Yes, use the above, for the reference, you can use board/denx/m28evk M > > > Thanks and Regards, > Shilpa > > ________________________________ > > DISCLAIMER: > > This email may contain confidential information and is intended only for > the use of the specific individual(s) to which it is addressed. If you are > not the intended recipient of this email, you are hereby notified that any > unauthorized use, dissemination or copying of this email or the > information contained in it or attached to it is strictly prohibited. If > you received this message in error, please immediately notify the sender > at Infotech or [email protected] and delete the original > message. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
