Dear Marek Vasut, In message <[email protected]> you wrote: > > > But usb_init function call is not made in > > board_init function in the corresponding board specific file > > (evk23_evk.c). Could you help me finding what could be done for enabling > > USB support in u-boot to support for ARM based mx23evk board. > > Yes, use the above, for the reference, you can use board/denx/m28evk
...but only as a starting point for a new port. i.MX23 is similar to i.MX28 in many areas, but sufficiently different to cause enough problems to a newbie. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] One possible reason that things aren't going according to plan is that there never was a plan in the first place. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
