On Tuesday 07 August 2012 04:07:43 Bob Liu wrote: > --- a/arch/blackfin/include/asm/config-pre.h > +++ b/arch/blackfin/include/asm/config-pre.h > > #define BFIN_BOOT_16HOST_DMA 11 /* boot ldr from 16-bit host dma */ > #define BFIN_BOOT_8HOST_DMA 12 /* boot ldr from 8-bit host dma */ > #define BFIN_BOOT_NAND 13 /* boot ldr from nand flash */ > +#define BFIN_BOOT_RSI_MASTER 14 /* boot ldr from rsi */ > +#define BFIN_BOOT_LP_SLAVE 15 /* boot ldr from link port */ > > case BFIN_BOOT_16HOST_DMA: return "16bit dma"; > case BFIN_BOOT_8HOST_DMA: return "8bit dma"; > case BFIN_BOOT_NAND: return "nand flash"; > + case BFIN_BOOT_RSI_MASTER: return "rsi master"; > + case BFIN_BOOT_LP_SLAVE: return "link port slave"; > default: return "INVALID"; > } > }
seems like a change that should be by itself, or squashed into the "core bf60x
support" patch
> --- a/arch/blackfin/include/asm/mach-common/bits/dma.h
> +++ b/arch/blackfin/include/asm/mach-common/bits/dma.h
should be part of the "bf60x dma" patch
> --- a/arch/blackfin/include/asm/mach-common/bits/sdh.h
> +++ b/arch/blackfin/include/asm/mach-common/bits/sdh.h
> --- a/drivers/mmc/bfin_sdh.c
> +++ b/drivers/mmc/bfin_sdh.c
these are about the only changes that should be in this patch, and the subject
should be:
Blackfin: rsi: add support for bf60x
> --- a/board/bf609-ezkit/bf609-ezkit.c
> +++ b/board/bf609-ezkit/bf609-ezkit.c
> --- a/include/configs/bf609-ezkit.h
> +++ b/include/configs/bf609-ezkit.h
merge the rsi patch first, then squash this into the bf609-ezkit board patch
-mike
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
