Hi, all: Sorry for my entry-level question on uboot.
Just start learning how to build uboot, and get some education from A) http://www.omappedia.com/wiki/Get_started_with_ubuntu_on_omap4 B) http://www.alwaysinnovating.com/wiki/index.php/U-boot_compilation make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- omap4430sdp_config The above command has been used in A) shown above. Actually, I myself am working under Ubuntu 12.04, and my target is a pandaboard ES with omap4460 ... Two questions: 1) Where to find all the possible CROSS_COMPILE toolchains? and which one is what I should use? For example, from B), there are a lot of toolchains, how do I know which one I should use? 2) Where to find the particular configuration is precisely named "omap4430sdp_config"? I tried to grep "omap4460*" and "*gnueabi*" under the extracted (untared) uboot folder, but nothing has been found.... Can anybody help please? Best Regards --- Pei JIA Email: [email protected] cell: +1 604-362-5816 Welcome to Vision Open http://www.visionopen.com
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
