Hi Pei, On Fri, 31 Aug 2012 01:24:37 -0700, JIA Pei <[email protected]> wrote:
> Hi, all: > > Sorry for my entry-level question on uboot. > > Just start learning how to build uboot, and get some education from > A) http://www.omappedia.com/wiki/Get_started_with_ubuntu_on_omap4 > B) http://www.alwaysinnovating.com/wiki/index.php/U-boot_compilation Hmm... Any reason you're not directly reading the Denx U-Boot site? > make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- omap4430sdp_config That's one way of doing it. > The above command has been used in A) shown above. > Actually, I myself am working under Ubuntu 12.04, and my target is a > pandaboard ES with omap4460 ... > > Two questions: > 1) Where to find all the possible CROSS_COMPILE toolchains? and which > one is what I should use? Any recent toolchain that generates ARM EABI code should be ok. > For example, from B), there are a lot of toolchains, how do I know > which one I should use? You have one in Ubuntu, btw (from Linaro), for instance. > 2) Where to find the particular configuration is precisely named > "omap4430sdp_config"? Do you mean "how should I guess the configuration from the device's name known to the general public"? If so, the answer is "by Googling". There is no "general name to config" mapping that I know of. But if I understand correctly, you already know which config to build, right? > I tried to grep "omap4460*" and "*gnueabi*" under the extracted > (untared) uboot folder, but nothing has been found.... I don't understand what you are looking for there. Can you explain what your problem is, rather than what solutions you are trying? > Can anybody help please? > > > Best Regards Amicalement, -- Albert. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
