Dear Lucas Stach,

> usb_hub_descriptor has to be packed as it's used for
> communication with the device. Member wHubCharacteristics
> violates the natural alignment rules.

Doesn't apply, can you rebase on u-boot-usb ? I'll apply it then

> Use explicit unaligned access functions for this member.
> Fixes ARMv7 traping while using USB.
> 
> v2: fix typo found by Thomas Langer
> 
> Signed-off-by: Lucas Stach <d...@lynxeye.de>
> ---
>  common/usb_hub.c            | 14 +++++++++-----
>  drivers/usb/host/ehci-hcd.c |  7 +++++--
>  2 Dateien geändert, 14 Zeilen hinzugefügt(+), 7 Zeilen entfernt(-)
> 
> diff --git a/common/usb_hub.c b/common/usb_hub.c
> index 53d939c..e4a1201 100644
> --- a/common/usb_hub.c
> +++ b/common/usb_hub.c
> @@ -43,6 +43,7 @@
>  #include <common.h>
>  #include <command.h>
>  #include <asm/processor.h>
> +#include <asm/unaligned.h>
>  #include <linux/ctype.h>
>  #include <asm/byteorder.h>
>  #include <asm/unaligned.h>
> @@ -269,6 +270,7 @@ static int usb_hub_configure(struct usb_device *dev)
>       int i;
>       ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ);
>       unsigned char *bitmap;
> +     short hubCharacteristics;
>       struct usb_hub_descriptor *descriptor;
>       struct usb_hub_device *hub;
>  #ifdef USB_HUB_DEBUG
> @@ -304,8 +306,9 @@ static int usb_hub_configure(struct usb_device *dev)
>       }
>       memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
>       /* adjust 16bit values */
> -     hub->desc.wHubCharacteristics =
> -                             le16_to_cpu(descriptor->wHubCharacteristics);
> +     put_unaligned(le16_to_cpu(get_unaligned(
> +                     &descriptor->wHubCharacteristics)),
> +                     &hub->desc.wHubCharacteristics);
>       /* set the bitmap */
>       bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
>       /* devices not removable by default */
> @@ -322,7 +325,8 @@ static int usb_hub_configure(struct usb_device *dev)
>       dev->maxchild = descriptor->bNbrPorts;
>       USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);
> 
> -     switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) {
> +     hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics);
> +     switch (hubCharacteristics & HUB_CHAR_LPSM) {
>       case 0x00:
>               USB_HUB_PRINTF("ganged power switching\n");
>               break;
> @@ -335,12 +339,12 @@ static int usb_hub_configure(struct usb_device *dev)
>               break;
>       }
> 
> -     if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND)
> +     if (hubCharacteristics & HUB_CHAR_COMPOUND)
>               USB_HUB_PRINTF("part of a compound device\n");
>       else
>               USB_HUB_PRINTF("standalone hub\n");
> 
> -     switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) {
> +     switch (hubCharacteristics & HUB_CHAR_OCPM) {
>       case 0x00:
>               USB_HUB_PRINTF("global over-current protection\n");
>               break;
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index bfea192..d90e94d 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -22,6 +22,7 @@
>   */
>  #include <common.h>
>  #include <asm/byteorder.h>
> +#include <asm/unaligned.h>
>  #include <usb.h>
>  #include <asm/io.h>
>  #include <malloc.h>
> @@ -876,10 +877,12 @@ int usb_lowlevel_init(int index, void **controller)
>       debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
>       /* Port Indicators */
>       if (HCS_INDICATOR(reg))
> -             descriptor.hub.wHubCharacteristics |= 0x80;
> +             put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
> +                             | 0x80, &descriptor.hub.wHubCharacteristics);
>       /* Port Power Control */
>       if (HCS_PPC(reg))
> -             descriptor.hub.wHubCharacteristics |= 0x01;
> +             put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
> +                             | 0x01, &descriptor.hub.wHubCharacteristics);
> 
>       /* Start the host controller. */
>       cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to