On Thu, Nov 1, 2012 at 3:14 PM, Stephen Warren <[email protected]> wrote: > From: Stephen Warren <[email protected]> > > TrimSlice's USB1 port has two purposes; it either acts as a device port > hosting Tegra's USB recovery protocol, or acts as a host port connected > to the internal USB->SATA bridge chip, which may in turn be connected to > an SSD or HDD. Add the appropriate device tree and board configuration > options to enable this port as a host port, and route the port to the > SATA bridge using the VBUS GPIO. > > Signed-off-by: Stephen Warren <[email protected]>
Looks right to me. Acked-by: Simon Glass <[email protected]> > --- > board/compulab/dts/tegra20-trimslice.dts | 3 ++- > board/compulab/trimslice/trimslice.c | 8 ++++++++ > include/configs/trimslice.h | 1 + > 3 files changed, 11 insertions(+), 1 deletions(-) _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
