On 7/23/26 9:38 AM, Jorge Ramirez-Ortiz wrote:
> OP-TEE secure storage (CFG_RPMB_FS) requires RPMB, but on UFS-only
> platforms with no eMMC the OP-TEE RPMB supplicant has no way to reach the
> device's RPMB Well-Known LUN, which UFS exposes through SCSI SECURITY
> PROTOCOL IN/OUT commands rather than an eMMC-style RPMB partition; this
> transport provides that missing path so RPMB-backed secure storage works
> on UFS-based platforms.
>
> Signed-off-by: Jorge Ramirez-Ortiz <[email protected]>
> ---
> drivers/ufs/Kconfig | 10 +++
> drivers/ufs/Makefile | 1 +
> drivers/ufs/ufs-rpmb.c | 173 +++++++++++++++++++++++++++++++++++++++
> drivers/ufs/ufs-uclass.c | 6 +-
> drivers/ufs/ufs.h | 7 ++
> include/scsi.h | 2 +
> include/ufs.h | 4 +
> 7 files changed, 200 insertions(+), 3 deletions(-)
> create mode 100644 drivers/ufs/ufs-rpmb.c
>
> diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig
> index 49472933de3..99160a0819b 100644
> --- a/drivers/ufs/Kconfig
> +++ b/drivers/ufs/Kconfig
> @@ -92,4 +92,14 @@ config UFS_TI_J721E
> This selects the glue layer driver for Cadence controller
> present on TI's J721E devices.
>
> +config SUPPORT_UFS_RPMB
> + bool "Enable UFS RPMB (Replay Protected Memory Block) support"
> + depends on UFS && OPTEE && !SUPPORT_EMMC_RPMB
> + help
> + Route OP-TEE RPMB requests to the UFS RPMB Well-Known LUN using
> + SCSI SECURITY PROTOCOL IN/OUT commands. Required for OP-TEE secure
> + storage (CFG_RPMB_FS) on UFS-based platforms that have no eMMC.
> + The OP-TEE supplicant handles a single RPMB transport, so this is
> + mutually exclusive with the eMMC RPMB supplicant (SUPPORT_EMMC_RPMB).
> +
> endmenu
> diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile
> index e7f3c1d30c4..d60440ca119 100644
> --- a/drivers/ufs/Makefile
> +++ b/drivers/ufs/Makefile
> @@ -13,3 +13,4 @@ obj-$(CONFIG_UFS_RENESAS) += ufs-renesas.o
> obj-$(CONFIG_UFS_RENESAS_GEN5) += ufs-renesas-rcar-gen5.o
> obj-$(CONFIG_UFS_ROCKCHIP) += ufs-rockchip.o
> obj-$(CONFIG_UFS_TI_J721E) += ti-j721e-ufs.o
> +obj-$(CONFIG_SUPPORT_UFS_RPMB) += ufs-rpmb.o
> diff --git a/drivers/ufs/ufs-rpmb.c b/drivers/ufs/ufs-rpmb.c
> new file mode 100644
> index 00000000000..fb4cd42ad75
> --- /dev/null
> +++ b/drivers/ufs/ufs-rpmb.c
> @@ -0,0 +1,173 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <dm.h>
> +#include <log.h>
> +#include <malloc.h>
> +#include <scsi.h>
> +#include <ufs.h>
> +#include <asm/cache.h>
> +#include <linux/errno.h>
> +#include <linux/string.h>
> +#include "ufs.h"
> +
> +#define RPMB_REQ_KEY 1
> +#define RPMB_REQ_WCOUNTER 2
> +#define RPMB_REQ_WRITE_DATA 3
> +#define RPMB_REQ_READ_DATA 4
> +#define RPMB_REQ_STATUS 5
> +
> +#define RPMB_FRAME_SIZE 512
> +#define RPMB_FRAME_REQ_OFFSET 510
> +
> +#define UFS_RPMB_UA_RETRIES 3
> +
> +#define SEC_PROTOCOL_UFS 0xEC
> +#define UFS_RPMB_SEC_PROTOCOL_ID 0x01
> +
> +#define GEOMETRY_DESC_RPMB_RW_SIZE 0x17
> +
> +static u16 rpmb_frame_request(const void *frame)
> +{
> + const u8 *p = frame;
> +
> + return ((u16)p[RPMB_FRAME_REQ_OFFSET] << 8) |
> + p[RPMB_FRAME_REQ_OFFSET + 1];
> +}
I would drop the function and just use get_unaligned_be16()
directly.
> +
> +static int ufs_rpmb_secprot(struct udevice *scsi_dev, unsigned int region,
> + u8 opcode, void *buf, unsigned int nframes,
> + enum dma_data_direction dir)
> +{
> + u16 spsp = (region << 8) | UFS_RPMB_SEC_PROTOCOL_ID;
> + u32 len = nframes * RPMB_FRAME_SIZE;
> + struct scsi_cmd pccb;
> + void *dma_buf = buf;
> + void *bounce = NULL;
> + int retries;
> + int ret = 0;
> +
> + if (!IS_ALIGNED((uintptr_t)buf, ARCH_DMA_MINALIGN)) {
> + bounce = memalign(ARCH_DMA_MINALIGN,
> + ALIGN(len, ARCH_DMA_MINALIGN));
> + if (!bounce)
> + return -ENOMEM;
> + dma_buf = bounce;
> + if (dir == DMA_TO_DEVICE)
> + memcpy(bounce, buf, len);
> + }
> +
> + memset(&pccb, 0, sizeof(pccb));
> + pccb.lun = UFS_UPIU_RPMB_WLUN;
> + pccb.cmd[0] = opcode;
> + pccb.cmd[1] = SEC_PROTOCOL_UFS;
> + pccb.cmd[2] = (spsp >> 8) & 0xff;
> + pccb.cmd[3] = spsp & 0xff;
How about using put_unaligned_be16()?
> + pccb.cmd[4] = 0;
> + pccb.cmd[5] = 0;
> + pccb.cmd[6] = (len >> 24) & 0xff;
> + pccb.cmd[7] = (len >> 16) & 0xff;
> + pccb.cmd[8] = (len >> 8) & 0xff;
> + pccb.cmd[9] = len & 0xff;
And put_unaligned_be32().
> + pccb.cmd[10] = 0;
> + pccb.cmd[11] = 0;
> + pccb.cmdlen = 12;
> + pccb.pdata = dma_buf;
> + pccb.datalen = len;
> + pccb.dma_dir = dir;
> +
> + for (retries = UFS_RPMB_UA_RETRIES; retries > 0; retries--) {
> + ret = scsi_exec(scsi_dev, &pccb);
> + if (!ret)
> + break;
> + }
> +
> + if (bounce) {
> + if (!ret && dir == DMA_FROM_DEVICE)
> + memcpy(buf, bounce, len);
> +
> + free(bounce);
> + }
> +
> + return ret;
> +}
> +
> +static int ufs_rpmb_send(struct udevice *scsi_dev, unsigned int region,
> + void *frames, unsigned int nframes)
> +{
> + return ufs_rpmb_secprot(scsi_dev, region, SCSI_SECURITY_PROTOCOL_OUT,
> + frames, nframes, DMA_TO_DEVICE);
> +}
> +
> +static int ufs_rpmb_recv(struct udevice *scsi_dev, unsigned int region,
> + void *frames, unsigned int nframes)
> +{
> + return ufs_rpmb_secprot(scsi_dev, region, SCSI_SECURITY_PROTOCOL_IN,
> + frames, nframes, DMA_FROM_DEVICE);
> +}
> +
> +int ufs_rpmb_route_frames(struct udevice *scsi_dev, unsigned int region,
> + void *req, unsigned long reqlen, void *rsp,
> + unsigned long rsplen)
> +{
> + unsigned int n_req = reqlen / RPMB_FRAME_SIZE;
> + unsigned int n_rsp = rsplen / RPMB_FRAME_SIZE;
> + u16 request;
> + int ret;
> +
> + if (!scsi_dev || reqlen % RPMB_FRAME_SIZE ||
> + rsplen % RPMB_FRAME_SIZE || !n_req)
> + return -EINVAL;
> +
> + request = rpmb_frame_request(req);
> +
> + switch (request) {
> + case RPMB_REQ_KEY:
> + case RPMB_REQ_WRITE_DATA: {
> + u8 status_frame[RPMB_FRAME_SIZE];
> +
> + ret = ufs_rpmb_send(scsi_dev, region, req, n_req);
> + if (ret)
> + return ret;
> +
> + memset(status_frame, 0, sizeof(status_frame));
> + status_frame[RPMB_FRAME_REQ_OFFSET] = RPMB_REQ_STATUS >> 8;
> + status_frame[RPMB_FRAME_REQ_OFFSET + 1] = RPMB_REQ_STATUS &
> 0xff;
put_unaligned_be16()
> + ret = ufs_rpmb_send(scsi_dev, region, status_frame, 1);
> + if (ret)
> + return ret;
> +
> + if (n_rsp < 1)
> + return -EINVAL;
> +
> + return ufs_rpmb_recv(scsi_dev, region, rsp, 1);
> + }
> + case RPMB_REQ_WCOUNTER:
> + case RPMB_REQ_READ_DATA:
> + ret = ufs_rpmb_send(scsi_dev, region, req, 1);
> + if (ret)
> + return ret;
> +
> + if (n_rsp < 1)
> + return -EINVAL;
> +
> + return ufs_rpmb_recv(scsi_dev, region, rsp, n_rsp);
> + default:
> + debug("ufs-rpmb: unsupported request 0x%x\n", request);
> + return -EINVAL;
> + }
> +}
> +
> +static int ufs_rpmb_read_geometry(struct udevice *scsi_dev, u8 *rpmb_rw_size)
> +{
> + struct ufs_hba *hba = dev_get_uclass_priv(scsi_dev->parent);
> + u8 desc[QUERY_DESC_GEOMETRY_DEF_SIZE];
> + int ret;
> +
> + ret = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_GEOMETRY, 0, 0,
> + desc, sizeof(desc));
> + if (ret)
> + return ret;
> +
> + *rpmb_rw_size = desc[GEOMETRY_DESC_RPMB_RW_SIZE];
> +
> + return 0;
> +}
This function should be defered to the next patch were it is used.
Otherwise we could get compilers complaining during git bisect about
unused static function.
