On 29/07/26 17:27:30, David Lechner wrote:
> On 7/23/26 9:38 AM, Jorge Ramirez-Ortiz wrote:
> > OP-TEE secure storage (CFG_RPMB_FS) requires RPMB, but on UFS-only
> > platforms with no eMMC the OP-TEE RPMB supplicant has no way to reach the
> > device's RPMB Well-Known LUN, which UFS exposes through SCSI SECURITY
> > PROTOCOL IN/OUT commands rather than an eMMC-style RPMB partition; this
> > transport provides that missing path so RPMB-backed secure storage works
> > on UFS-based platforms.
> >
> > Signed-off-by: Jorge Ramirez-Ortiz <[email protected]>
> > ---
> > drivers/ufs/Kconfig | 10 +++
> > drivers/ufs/Makefile | 1 +
> > drivers/ufs/ufs-rpmb.c | 173 +++++++++++++++++++++++++++++++++++++++
> > drivers/ufs/ufs-uclass.c | 6 +-
> > drivers/ufs/ufs.h | 7 ++
> > include/scsi.h | 2 +
> > include/ufs.h | 4 +
> > 7 files changed, 200 insertions(+), 3 deletions(-)
> > create mode 100644 drivers/ufs/ufs-rpmb.c
> >
> > diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig
> > index 49472933de3..99160a0819b 100644
> > --- a/drivers/ufs/Kconfig
> > +++ b/drivers/ufs/Kconfig
> > @@ -92,4 +92,14 @@ config UFS_TI_J721E
> > This selects the glue layer driver for Cadence controller
> > present on TI's J721E devices.
> >
> > +config SUPPORT_UFS_RPMB
> > + bool "Enable UFS RPMB (Replay Protected Memory Block) support"
> > + depends on UFS && OPTEE && !SUPPORT_EMMC_RPMB
> > + help
> > + Route OP-TEE RPMB requests to the UFS RPMB Well-Known LUN using
> > + SCSI SECURITY PROTOCOL IN/OUT commands. Required for OP-TEE secure
> > + storage (CFG_RPMB_FS) on UFS-based platforms that have no eMMC.
> > + The OP-TEE supplicant handles a single RPMB transport, so this is
> > + mutually exclusive with the eMMC RPMB supplicant (SUPPORT_EMMC_RPMB).
> > +
> > endmenu
> > diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile
> > index e7f3c1d30c4..d60440ca119 100644
> > --- a/drivers/ufs/Makefile
> > +++ b/drivers/ufs/Makefile
> > @@ -13,3 +13,4 @@ obj-$(CONFIG_UFS_RENESAS) += ufs-renesas.o
> > obj-$(CONFIG_UFS_RENESAS_GEN5) += ufs-renesas-rcar-gen5.o
> > obj-$(CONFIG_UFS_ROCKCHIP) += ufs-rockchip.o
> > obj-$(CONFIG_UFS_TI_J721E) += ti-j721e-ufs.o
> > +obj-$(CONFIG_SUPPORT_UFS_RPMB) += ufs-rpmb.o
> > diff --git a/drivers/ufs/ufs-rpmb.c b/drivers/ufs/ufs-rpmb.c
> > new file mode 100644
> > index 00000000000..fb4cd42ad75
> > --- /dev/null
> > +++ b/drivers/ufs/ufs-rpmb.c
> > @@ -0,0 +1,173 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +#include <dm.h>
> > +#include <log.h>
> > +#include <malloc.h>
> > +#include <scsi.h>
> > +#include <ufs.h>
> > +#include <asm/cache.h>
> > +#include <linux/errno.h>
> > +#include <linux/string.h>
> > +#include "ufs.h"
> > +
> > +#define RPMB_REQ_KEY 1
> > +#define RPMB_REQ_WCOUNTER 2
> > +#define RPMB_REQ_WRITE_DATA 3
> > +#define RPMB_REQ_READ_DATA 4
> > +#define RPMB_REQ_STATUS 5
> > +
> > +#define RPMB_FRAME_SIZE 512
> > +#define RPMB_FRAME_REQ_OFFSET 510
> > +
> > +#define UFS_RPMB_UA_RETRIES 3
> > +
> > +#define SEC_PROTOCOL_UFS 0xEC
> > +#define UFS_RPMB_SEC_PROTOCOL_ID 0x01
> > +
> > +#define GEOMETRY_DESC_RPMB_RW_SIZE 0x17
> > +
> > +static u16 rpmb_frame_request(const void *frame)
> > +{
> > + const u8 *p = frame;
> > +
> > + return ((u16)p[RPMB_FRAME_REQ_OFFSET] << 8) |
> > + p[RPMB_FRAME_REQ_OFFSET + 1];
> > +}
>
> I would drop the function and just use get_unaligned_be16()
> directly.
ok
>
> > +
> > +static int ufs_rpmb_secprot(struct udevice *scsi_dev, unsigned int region,
> > + u8 opcode, void *buf, unsigned int nframes,
> > + enum dma_data_direction dir)
> > +{
> > + u16 spsp = (region << 8) | UFS_RPMB_SEC_PROTOCOL_ID;
> > + u32 len = nframes * RPMB_FRAME_SIZE;
> > + struct scsi_cmd pccb;
> > + void *dma_buf = buf;
> > + void *bounce = NULL;
> > + int retries;
> > + int ret = 0;
> > +
> > + if (!IS_ALIGNED((uintptr_t)buf, ARCH_DMA_MINALIGN)) {
> > + bounce = memalign(ARCH_DMA_MINALIGN,
> > + ALIGN(len, ARCH_DMA_MINALIGN));
> > + if (!bounce)
> > + return -ENOMEM;
> > + dma_buf = bounce;
> > + if (dir == DMA_TO_DEVICE)
> > + memcpy(bounce, buf, len);
> > + }
> > +
> > + memset(&pccb, 0, sizeof(pccb));
> > + pccb.lun = UFS_UPIU_RPMB_WLUN;
> > + pccb.cmd[0] = opcode;
> > + pccb.cmd[1] = SEC_PROTOCOL_UFS;
> > + pccb.cmd[2] = (spsp >> 8) & 0xff;
> > + pccb.cmd[3] = spsp & 0xff;
>
> How about using put_unaligned_be16()?
>
> > + pccb.cmd[4] = 0;
> > + pccb.cmd[5] = 0;
> > + pccb.cmd[6] = (len >> 24) & 0xff;
> > + pccb.cmd[7] = (len >> 16) & 0xff;
> > + pccb.cmd[8] = (len >> 8) & 0xff;
> > + pccb.cmd[9] = len & 0xff;
>
> And put_unaligned_be32().
sure
>
> > + pccb.cmd[10] = 0;
> > + pccb.cmd[11] = 0;
> > + pccb.cmdlen = 12;
> > + pccb.pdata = dma_buf;
> > + pccb.datalen = len;
> > + pccb.dma_dir = dir;
> > +
> > + for (retries = UFS_RPMB_UA_RETRIES; retries > 0; retries--) {
> > + ret = scsi_exec(scsi_dev, &pccb);
> > + if (!ret)
> > + break;
> > + }
> > +
> > + if (bounce) {
> > + if (!ret && dir == DMA_FROM_DEVICE)
> > + memcpy(buf, bounce, len);
> > +
> > + free(bounce);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int ufs_rpmb_send(struct udevice *scsi_dev, unsigned int region,
> > + void *frames, unsigned int nframes)
> > +{
> > + return ufs_rpmb_secprot(scsi_dev, region, SCSI_SECURITY_PROTOCOL_OUT,
> > + frames, nframes, DMA_TO_DEVICE);
> > +}
> > +
> > +static int ufs_rpmb_recv(struct udevice *scsi_dev, unsigned int region,
> > + void *frames, unsigned int nframes)
> > +{
> > + return ufs_rpmb_secprot(scsi_dev, region, SCSI_SECURITY_PROTOCOL_IN,
> > + frames, nframes, DMA_FROM_DEVICE);
> > +}
> > +
> > +int ufs_rpmb_route_frames(struct udevice *scsi_dev, unsigned int region,
> > + void *req, unsigned long reqlen, void *rsp,
> > + unsigned long rsplen)
> > +{
> > + unsigned int n_req = reqlen / RPMB_FRAME_SIZE;
> > + unsigned int n_rsp = rsplen / RPMB_FRAME_SIZE;
> > + u16 request;
> > + int ret;
> > +
> > + if (!scsi_dev || reqlen % RPMB_FRAME_SIZE ||
> > + rsplen % RPMB_FRAME_SIZE || !n_req)
> > + return -EINVAL;
> > +
> > + request = rpmb_frame_request(req);
> > +
> > + switch (request) {
> > + case RPMB_REQ_KEY:
> > + case RPMB_REQ_WRITE_DATA: {
> > + u8 status_frame[RPMB_FRAME_SIZE];
> > +
> > + ret = ufs_rpmb_send(scsi_dev, region, req, n_req);
> > + if (ret)
> > + return ret;
> > +
> > + memset(status_frame, 0, sizeof(status_frame));
> > + status_frame[RPMB_FRAME_REQ_OFFSET] = RPMB_REQ_STATUS >> 8;
> > + status_frame[RPMB_FRAME_REQ_OFFSET + 1] = RPMB_REQ_STATUS &
> > 0xff;
>
> put_unaligned_be16()
>
> > + ret = ufs_rpmb_send(scsi_dev, region, status_frame, 1);
> > + if (ret)
> > + return ret;
> > +
> > + if (n_rsp < 1)
> > + return -EINVAL;
> > +
> > + return ufs_rpmb_recv(scsi_dev, region, rsp, 1);
> > + }
> > + case RPMB_REQ_WCOUNTER:
> > + case RPMB_REQ_READ_DATA:
> > + ret = ufs_rpmb_send(scsi_dev, region, req, 1);
> > + if (ret)
> > + return ret;
> > +
> > + if (n_rsp < 1)
> > + return -EINVAL;
> > +
> > + return ufs_rpmb_recv(scsi_dev, region, rsp, n_rsp);
> > + default:
> > + debug("ufs-rpmb: unsupported request 0x%x\n", request);
> > + return -EINVAL;
> > + }
> > +}
> > +
>
> > +static int ufs_rpmb_read_geometry(struct udevice *scsi_dev, u8
> > *rpmb_rw_size)
> > +{
> > + struct ufs_hba *hba = dev_get_uclass_priv(scsi_dev->parent);
> > + u8 desc[QUERY_DESC_GEOMETRY_DEF_SIZE];
> > + int ret;
> > +
> > + ret = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_GEOMETRY, 0, 0,
> > + desc, sizeof(desc));
> > + if (ret)
> > + return ret;
> > +
> > + *rpmb_rw_size = desc[GEOMETRY_DESC_RPMB_RW_SIZE];
> > +
> > + return 0;
> > +}
>
> This function should be defered to the next patch were it is used.
> Otherwise we could get compilers complaining during git bisect about
> unused static function.
>
ack
