Hi Jonas,
On 8/12/26 6:20 PM, Jonas Karlman wrote:
Hi Quentin,
On 8/12/2026 12:33 PM, Quentin Schulz wrote:
Hi Jonas,
On 8/3/26 9:09 PM, Jonas Karlman wrote:
Current rockchip,rk3528-saradc fallback instruct the driver to use a
There is no rk3506 DTSI available either in Linux kernel or U-Boot, so
this fallback technically doesn't even exist and we don't have an issue
(yet). Just say that none of the the v2 SARADC data match what the
RK3506 can do (due to the divider and parent clocks not being able to
achieve the requested 1MHz). Please simply rename the commit title to
reflect you're adding support for the SARADC found on the RK3506.
Sure, I will update the commit message in a v2.
The rk3528 fallback mentioned was in reference to the dt-bindings:
- items:
- const: rockchip,rk3506-saradc
- const: rockchip,rk3528-saradc
Ha! Completely missed that, thanks the clarification.
1 GHz clock rate. However, the CLK_SARADC used on RK3506 can only be
configured to use a 32 KHz, 400 KHz or 1.5-24 GHz rate.
This is quite misleading. The parent clocks are 32KHz, 400KHz or 24MHz.
The divider is between 1 and 16.
You are correct, I must have mixed up this clock with a different clock
that had multiple parent options and the divider was for one of those
parent options.
This means that 1MHz is not achievable with the dividers and we need to
aim for something else. Please reword the commit log to reflect this.
I'm also not sure where people got 32KHz, 400KHz and 24MHz but it's
what's specified in the Linux kernel, so fine with me :)
Add driver data for rockchip,rk3506-saradc that request use of a 1.5 GHz
clock rate, to avoid clock divider overflow in the RK3506 clock driver.
Signed-off-by: Jonas Karlman <[email protected]>
---
drivers/adc/rockchip-saradc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/adc/rockchip-saradc.c b/drivers/adc/rockchip-saradc.c
index 1515951403c9..50861b61eea4 100644
--- a/drivers/adc/rockchip-saradc.c
+++ b/drivers/adc/rockchip-saradc.c
@@ -339,6 +339,14 @@ static const struct rockchip_saradc_data
rk3399_saradc_data = {
.stop = rockchip_saradc_stop_v1,
};
+static const struct rockchip_saradc_data rk3506_saradc_data = {
+ .num_bits = 10,
It has 12 bits according to the TRM.
Hum, in the datasheet for RK3506J v1.2, RK3506B v1.4, RK3506G2 v1.5 and
RK3506 TRM v1.1/v1.2 it lists 10-bit resolution.
Well, I read the register description and it says 11:0. But the first
sentence in the SARADC section says "10-bit"... sooooo /me shrugs.
Ideally, we should check whether the ADC returns close to 1023 (10 bits)
or 4095 (12 bits) when it's fed 1.8V and then we would know for sure :)
Cheers,
Quentin
