Enable the configuration required for the HDMI pipeline on MT8188 based boards such as the Genio 510 EVK (MT8370) and Genio 700 EVK (MT8390): video, the MediaTek HDMI driver, DM I2C for the DDC bus and the PHY uclass.
Everything else the driver needs is selected by CONFIG_VIDEO_MEDIATEK_HDMI. The U-Boot logo is not enabled by a symbol of its own: CONFIG_VIDEO_LOGO is "default y if !SPLASH_SCREEN", so CONFIG_VIDEO=y already brings it in. Signed-off-by: Julien Stephan <[email protected]> --- configs/mt8188.config | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configs/mt8188.config b/configs/mt8188.config index c6785476d9a..8073354273d 100644 --- a/configs/mt8188.config +++ b/configs/mt8188.config @@ -15,13 +15,17 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_OF_UPSTREAM=y CONFIG_CLK=y +CONFIG_DM_I2C=y CONFIG_MMC_MTK=y +CONFIG_PHY=y CONFIG_PINCTRL=y CONFIG_POWER_DOMAIN=y CONFIG_MT8188_POWER_DOMAIN=y CONFIG_BAUDRATE=921600 CONFIG_DM_SERIAL=y CONFIG_MTK_SERIAL=y +CONFIG_VIDEO=y +CONFIG_VIDEO_MEDIATEK_HDMI=y # CONFIG_WATCHDOG_AUTOSTART is not set CONFIG_WDT=y CONFIG_WDT_MTK=y -- 2.55.0
