On Tue, Sep 01, 2026 at 11:12:58AM +0200, Linus Walleij wrote: > Switch the U8500 Stemmy configuration to the upstream Samsung Janice > device tree and enable booting an EFI system from the external SD card. > > Add compact DB8500 pinctrl support for applying the default states from > the upstream device trees. Extend the PL180 driver to configure Ux500 > signal direction and the SD card supply voltages. > > The upstream device trees describe the SD card supplies through the > AB8500 or AB8505 PMIC. Add support for the AUX3 regulator used as > vmmc-supply, using the existing AB8500 PMIC driver for register access. > Enable fixed regulators for the vqmmc level shifters used on the other > supported Samsung boards. > > Backport the pending Linux DTS fixes for Golden's duplicate regulator > name and GPIO key labels. These patches are queued for v7.4 on a locked > down branch: > https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git/log/?h=ux500-dts-for-soc
OK, so, the problem is that since they aren't in Linus' tree, they may get over-written with v7.3-dts once that exists and I do the import. Can those changes live in -u-boot.dtsi file(s) under arch/arm/... until they are available in devicetree-rebasing? Sorry for not catching this earlier. -- Tom
signature.asc
Description: PGP signature
